Advertisement
AquaRite S3 Series
Pool Chlorinator and Automation Control
\.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
®
Owner's Manual
AQRS340
AQRS325
AQRS315
Hayward Industries
400 Connell Drive, Suite 6100
Berkeley Heights, NJ 07922
Phone: (908) 355-7995
www.hayward.com
Contents
Before You Begin...........................2
Mounting the Equipment...............7
Plumbing......................................8
Electrical.................................,,...9
Preparing Water...........................17
Configuration..............................20
Operation....................................22
Remote Operation.......................28
Warranty......................................30
092769 RevA
Advertisement
Related Manuals for Hayward AquaRite AQRS315
Summarization of Contents
Mounting the Equipment
Water Sensor (required for heater control)
Instructions for installing the water sensor for heater control functionality.
Air Sensor (required for recirc freeze protection)
Instructions for mounting the air sensor for recirculation freeze protection.
Low Voltage Wiring
Smart Relay Wiring
Instructions for wiring the Smart Relay to the AquaRite S3 for pump control.
Hayward Variable Speed Pump (VSP) Wiring
Details wiring instructions for Hayward Variable Speed Pumps (VSP).
Heater Control
2-Wire Remote Control Wiring
Details the wiring for a 2-wire remote control connection for heaters.
Sensors
Temperature Sensors
Information on connecting Hayward 10K ohm thermistor sensors for temperature measurement.
Preparing Pool/Spa Water
Water Chemistry
Summarizes recommended water chemistry levels for pool and spa sanitization.
Saturation Index Explanation
Explains the saturation index (Si) and its importance for water balance.
Configuration
Navigation and Configuration Wizard
Explains how to navigate the AquaRite S3's menus and use the configuration wizard.
Language Selection
Option to select the display language for the AquaRite S3.
Time and Units Settings
Settings for time format, date, and temperature/salinity units.
Operation
Home Screen Overview
Overview of the AquaRite S3's home screen and displayed operational information.
Quick Adjustments
How to make immediate adjustments to chlorination and heater settings from the home screen.
Main Menu
Chlorination Menu
Controls for enabling/disabling chlorination and setting chlorine levels.
Desired Chlorine Level
How to set the desired chlorine output level from 0% to 100%.
Diagnostics Menu
Access to view technical data and operational parameters of the AquaRite S3.
Filter pump Menu
Filter Pump State
Option to enable or disable the filter pump.
Filter Pump Speed (for VSPs)
Setting pump speed (Low, Medium, High) for Variable Speed Pumps (VSPs).
Freeze Protection
Enabling or disabling freeze protection using the air temperature sensor.
Schedule Settings
Schedule Enable/Disable
Enabling or disabling daily schedules for pump operation.
Pump Speed by Schedule
Setting pump speeds (Low, Medium, High) for each programmed schedule.
Schedule Time Programming
Programming start and end times for daily operational schedules.
Heating Menu
Heater Control
Enabling or disabling heater control functionality.
Heater Pump Speed (for VSPs)
Setting minimum pump speed when the heater is active for VSPs.
Pool Cover Menu
Cover Detection
Enabling or disabling pool cover detection functionality.
Cover Chlorination Limit
Adjusting chlorination levels when the pool cover is closed.
Cover Pump Control
Enabling or disabling the pump when the pool cover is closed.
Cover Pump Speed (for VSPs)
Setting desired pump speed when the pool cover is closed for VSPs.
System Settings
Language Selection
Option to select the display language for the AquaRite S3.
Time and Date Settings
Setting the current time, format, DST, and units.
Display Settings
Adjusting display properties like brightness, sleep mode, contrast, and units.
System Information
Viewing current firmware versions for the display and mainboard.
Service Settings
Accessing service mode for device configuration and resets.
System Configuration Options
Remote Mode Configuration
Configuring the AquaRite S3 to operate in Master or Remote mode.
Heater Enable/Disable
Enabling or disabling the heater function.
Body of Water Type Selection
Selecting whether the unit is configured for a pool or a spa.
Air Temperature Sensor Enable
Enabling or disabling the air temperature sensor.
Low Salt Warning Level
Setting the adjustable value for low salt warnings.
Very Low Salt Shutdown Level
Setting the adjustable value for very low salt shutdown.
Service Mode Functions
Chlorination Status View
Viewing chlorination parameters and manually adjusting settings.
Sensor Status View
Viewing the status and temperatures of connected sensors.
Relay Status View
Viewing the status of configured relays.
Pump Status View
Viewing pump status and pump speed.
Firmware Upgrade Reference
Reference to page 21 for firmware upgrade information.
Need help?
Do you have a question about the AquaRite AQRS315 and is the answer not in the manual?
Questions and answers