Advertisement

1.800.561.8187
information@itm.com
www.
.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 6135 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Getting Started
Key Definitions
Defines essential terms and functions for operating the Scale Master Pro XE.
Operation Keys
Explanation of buttons used for powering on/off, clearing, and resetting the device.
Setup Keys
Details on keys used for mode, scale, and unit selection and configuration.
Measuring Keys
Covers keys used for taking linear measurements, width, area, and volume.
Function Keys
Explains keys for memory operations, auto-count, constant functions, and subtract mode.
Using the Scale Master Pro XE
Adjusting the Wheel
Instructions on how to adjust the device's polymer wheel for user preference.
Preferences
Button Beep Setting
Configures the audible beep feedback for button presses and auto-count.
Rolling Click Setting
Enables or disables the clicking sound that occurs during measurement rolling.
Stored Value Display Setting
Determines if values remain displayed or are cleared after being stored.
PC Terminate Setting
Sets cursor movement on PC after sending data.
PC Send Display Setting
Controls whether the displayed value remains visible after sending to PC.
PC Send Beep Setting
Enables or disables audible beeps for PC data transmission.
Built-In Scales
Imperial (Standard) Units
Lists the available scales for Imperial units in Architect, Engineer-I, Engineer-II, and Map formats.
Metric Units
Lists the available scales for Metric units in Architect, Engineer-I, Engineer-II, and Map formats.
Changing and Locking Settings
Changing Modes
Instructions for cycling through and selecting different operational modes.
Changing Scales
Instructions for cycling through and selecting available measurement scales.
Changing Units
Instructions for cycling through and selecting Imperial or Metric units.
Locking Modes, Scales and Units
How to use the lock switch to prevent accidental changes to settings.
Basic Operation
Maintaining Unit Position
Guidance on keeping the unit upright during rolling for accurate measurements.
Using the Memory Function
Adding Rolled Values
Steps to add rolled measurements to the device's memory.
Additional Functions
Additional Memory Functions
Functions for subtracting from memory and clearing the memory register.
Using Ruler Mode
How to use the device as a rolling ruler for measuring irregular shapes.
Setting Custom Scales
Rolling a Custom Scale
Procedure for setting a custom scale by rolling a known distance.
Entering a Custom Scale
Procedure for setting a custom scale by manually entering the exact distance.
Setting a Constant (+K)
Additional Constant Functions
Functions for verifying, subtracting, and resetting the constant value.
Finding Area and Volume
Finding Area
Steps to measure and calculate the area of a shape using length and width.
Finding Volume
Steps to measure and calculate the volume of a shape using length, width, and height.
Additional Area/Volume and PC Functions
Additional Area/Volume Functions
Functions to recall or clear stored length and width values.
Connecting to a PC
Instructions for connecting the device to a PC for data transfer.
Troubleshooting and Error Handling
Error and Auto-Range Functions
Explains error messages and how the device handles values exceeding display limits.
Interference
Discusses how external factors like light and electronic devices can affect measurements.
Device Maintenance and Settings
Battery and Automatic Shut-Off
Details power source, battery life, and automatic power-off feature.
Battery Replacement
Step-by-step instructions for replacing the device's batteries.
Default Settings
Lists the factory default values for various settings and preferences.
Product Information and Support
Specifications
Provides technical details including power source, display, resolution, accuracy, and dimensions.
Repair and Return Information
Guidelines for obtaining warranty service, troubleshooting, and returning the product.
Warranty
Details the warranty coverage and repair service procedures for the product.
Disclaimer
Legal statement regarding product limitations and liabilities.
Regulatory Compliance and Feedback
FCC Class B Compliance
Information regarding compliance with FCC rules for digital devices.
Looking for New Ideas
Invitation for users to submit new product ideas to the manufacturer.

Table of Contents