Group Setting - Samsung SRD-1650DC User Manual

Group Setting

You can set the group to whom the e-mail is sent, and specify the permission for each group.
You can add recipients for each group in the <Recipient> menu item.
The recipient is set separately from the DVR user group.
Using the mouse may help make setup easier.
3. In the <Network> setting window, press the up/down
( ) button to move to <Mailing Service> and press the
[ENTER] button.
4. Select <Group>.
Use direction buttons ( ◄ ►) to move to a desired item
5.
and set the value.
•
Add : Select <Add> and use the virtual keyboard to add a
group.

Refer to "Using Virtual Keyboard". (Page 36)
•
Delete : Deletes the selected group.
•
Rename : You can reset the recipient permission of an existing group.
•
Recipient Permission : Set the permission of the recipient group.
6. When the group setting is done, press <OK>.
Recipient Setting
You can add a user to the group or delete him/her from the group, or change the group.
Using the mouse may help make setup easier.
3. In the <Network> setting window, press the up/down
( ) button to move to <Mailing Service> and press the
[ENTER] button.
4. Select <Recipient>.
Use direction buttons ( ◄ ►) to move to a desired item
5.
and set the value.
•
Add : You can select a recipient name, e-mail address or
group.
You should have created a group in the <Group> menu
item before you can add a user to the group.

Refer to "Using Virtual Keyboard" for input of the user name and
the e-mail address. (Page 36)
6. When the recipient setting is done, press <OK>.
Mailing Service
Group
SMTP Event
Group Add
Recipient Permission
Sensor Motion
Change P/W HDD Info
Power On/Off Manual Record
OK Cancel
Mailing Service
SMTP Event Group
Group All Group
Group Name e-Mail Address
Previous/Next Page
OK Cancel
Mailing Service
SMTP Event Group
Group ABC
Add recipient
Group Name e-Mail Address
Name
Email
Select Group ABC
OK Cancel
Previous/Next Page
OK Cancel
Recipient
Delete Rename
Video Loss
Recipient
Add
Delete
Recipient
Add
Delete
English _65