Related Manuals for New Holland E135SR
Summarization of Contents
INTRODUCTION
TO THE READER
Information for the technician about the manual's purpose and contact details.
ADDITIONAL REFERENCE MANUALS
Lists other manuals relevant to the workshop.
DESCRIPTION OF THE COMPLETE WORKSHOP MANUAL
Explains the volumes and content of the workshop manual.
AVOID ACCIDENTS
General advice and rules to prevent accidents during operation and maintenance.
ATTENTION
Specific safety warnings regarding machine operation and maintenance procedures.
SAFETY PRECAUTIONS
General Safety Rules (Points 1-12)
Basic safety precautions for machine operation, maintenance, and repair (points 1-12).
General Safety Rules (Points 13-22)
Further safety precautions for machine operation, maintenance, and repair (points 13-22).
1. GENERAL PRECAUTIONS FOR REPAIRS
1.1 PREPARATION BEFORE DISASSEMBLING
Steps and considerations for preparing the machine before disassembly.
1.2 SAFETY IN DISASSEMBLING AND ASSEMBLING
Safety rules and precautions to follow during disassembly and assembly procedures.
1.3 DISASSEMBLING AND ASSEMBLING HYDRAULIC EQUIPMENT
Procedures and guidelines for disassembling and reassembling hydraulic components.
1.4 ELECTRICAL EQUIPMENT
Handling and precautions for electrical components during service.
1.5 HYDRAULIC PARTS
Information and specifications for hydraulic parts like O-rings and hoses.
1.6 WELDING REPAIR
Guidelines and safety precautions for performing welding repairs on the machine.
1.7 ENVIRONMENTAL MEASURE
Precautions and guidelines related to environmental protection during service.
2. INTERNATIONAL UNIT CONVERSION SYSTEM
Basic Units
Lists basic SI units and their designations.
Supplementary Units
Lists supplementary SI units and their designations.
Derived Units of Basic Units
Lists derived SI units and their designations.
Derived Units bearing Peculiar Designations
Lists derived SI units with special designations.
Prefixes of SI
Lists SI prefixes and their corresponding powers of 10.
Unit Conversion Table
Provides conversion values between JIS and SI units.
5. SPECIFICATIONS AND PERFORMANCE
Speed and Gradeability
Details the machine's travel speeds and gradeability.
Engine Specifications
Provides detailed specifications for the engine model.
Hydraulic Components Specifications
Lists specifications for the hydraulic system components.
Weight Specifications
Details the weight distribution and specifications of the machine.
9. ENGINE SPECIFICATION
9.1 SPECIFICATIONS
Provides detailed technical specifications for the engine.
9.2 ENGINE CHARACTERISTIC CURVE
Displays engine performance curves related to output, torque, and fuel consumption.
1. BOOM
1.1 BOOM DIMENSIONAL DRAWING
Provides dimensional drawings and measurements for the boom.
1.2 BOOM MAINTENANCE STANDARD
Details maintenance standards and clearance values for boom pins and bushings.
Need help?
Do you have a question about the E135SR and is the answer not in the manual?
Questions and answers