Monitor Image; Controlling The Monitor Image; Monitoring The Camera Image - Sony SNC-M3W User Manual

Monitor Image

The image shot by the camera is shown here. Date and
time is displayed at the top of the window.
Tip
When mark is displayed upper right side of the
window, you can use Pan/Tilt control function.
Controlling the Monitor
Image
You can monitor the camera image on the monitor
window of the main viewer.

Monitoring the camera image

1
(MPEG4 mode)
2
Log in to the home page to display the main viewer.
You can see how to log in on page 12, "Logging in
as a User".
Select the frame rate (only when the camera Video
mode is set to JPEG (page 24)).
Click the Frame rate list box to select the frame
rate for transmitting the image. Selectable frame
rates are 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25 and 30 fps.
The number means the frame number transmitted
per 1 second.
If you select 30 fps, the image is sent at the
maximum speed of the connected line (30 fps
maximum).
Note
The frame rate options indicate the maximum
number of frames that can be transmitted.
The number of frames actually transmitted may
vary depending on network environments and
camera settings (image size and image quality
settings).

Controlling the Monitor Image

(MPEG4 mode)
15