Mpeg4 Tab; Jpeg Tab - Sony SNC-M3W User Manual

Note
When you change the Microphone setting, click
Refresh of the browser to reflect the change in the
opening main viewer page.
Mic volume
Set the volume level of the audio input from the built-in
microphone or the m microphone input connectors. It is
adjustable from –10 to +10.
Audio bit rate
Select the bit rate when you send the audio from the
built-in microphone or from the m microphone input
connectors. 40, 32, 24 or 16 kbps can be selected.
Speaker output
Set whether you output the audio which is input to the
audio input connectors of your computer to the speaker
(active speaker for example) connected to the camera
line output connectors by using SNC audio upload tool
included in the supplied CD-ROM.
Select On to accept the audio data transmission from
SNC audio upload tool.
OK/Cancel
See "Buttons common to every setting menu" on page
19.

MPEG4 Tab

Frame rate
Set the frame rate of the MPEG image.
Selectable values are 1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25 and
30 fps. The unit is "fps" (frame number sent per a
second).
Bit rate
Set the bit rate of MPEG image transmission for a line.
Selectable values are 64, 128, 256, 384, 512, 768, 1024,
1536 and 2048 kbps.
Note
The selected frame rate and bit rate are a tentative value.
The actual frame rate and bit rate may be different
according to the image size, the shooting scene or the
network condition.
Frame rate priority
The frame rate of an image may fall depending on the
network situation. If On is selected, the bit rate will be
adjusted so that the frame rate does not drop.
OK/Cancel
See "Buttons common to every setting menu" on page
19.

JPEG Tab

Frame rate
Set the maximum frame rate of JPEG image that can be
monitored on the computer. Selectable frame rates are
5, 6, 8, 10, 15, 20, 25 and 30 fps.
Image quality
Set the quality of JPEG image.
Selectable values are from Level 1 to Level 5.
Selecting level 5 gives the image with the highest
quality.
Bandwidth control
When the video mode is set to JPEG, the network
bandwidth can be limited. Selectable bandwidths are
0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 2.0, 3.0, 4.0, and Unlimited
Mbps. When you do not wish to limit the bandwidth,
select Unlimited.
OK/Cancel
See "Buttons common to every setting menu" on page
19.
Setting the Camera Image and Audio — Camera setting Menu
25