Send Trigger Tab - Setting Mail Sending Mode; Pop Server Name - Sony SNC-M3W User Manual

POP before SMTP: Select if POP before SMTP
authentication is necessary when an e-mail is sent.

POP server name

It is necessary when the POP before SMTP is selected
in Authentication.
Type the POP (receiving mail) server name up to 64
characters, or type the IP address of the POP server. This
setting is necessary when the SMTP server which sends
e-mails performs authentication using the POP user
account.
User name, Password
Type the user name and Password of the user who has
the mail account. This setting is necessary when the
SMTP server which sends e-Mails performs
authentication.
Recipient e-Mail address
Type the recipient e-Mail address up to 64 characters.
You can specify up to three recipient E-mail addresses.
Administrator e-Mail address
Type the Administrator e-Mail address up to 64
characters.
This address is used for reply mail and sending system
messages from the SMTP server.
Subject
Type the subject/title of the e-Mail up to 64 characters.
Message
Type the text of the e-Mail up to 384 characters. (A line
break is equivalent to 2 characters.)
OK/Cancel
See "Buttons common to every setting menu" on page
19.
32
Sending a mail — e-Mail (SMTP) setting Menu
Send trigger Tab — Setting mail
sending mode
You can set to send mails periodically or to send mails
ry synchronizing with the built-in motion detection
function.
Video mode MPEG4
Periodical sending You can send
a message
only.
Motion detection You can send
sending a message
only.
Periodical sending (JPEG mode only)
Select On when you want to send mails periodically. If
you select Off, Periodical sending is not executed.
Interval
Type the interval at which you want to send a mail
periodically. You can set the hour (H) and minutes (M)
between 30 minutes and 24 hours (one day).
File attachment
Set whether an image file is attached to the mail sent or
not.
When On is selected, the image file made by the settings
below is attached. When Off is selected, only the
message is sent.
Note
This is displayed when the Video mode is set to JPEG.
Synchronize preset position
An image of the specified preset position can be sent at
periodical sending.
When you select On, an image of the specified preset
position will be sent. When you select Off, the image
file of the position the camera currently faces will be
sent.
JPEG
You can send a
message with an
image attached.
—