Advertisement

Models:
SL-950TR-C
SL-750TR-C
SL-550TR-C
WARNING: IF THE INFORMATION
IN THESE INSTRUCTIONS IS NOT
FOLLOWED EXACTLY, A FIRE OR
EXPLOSION MAY RESULT CAUS-
ING PROPERTY DAMAGE, PER-
SONAL INJURY, OR DEATH.
- Do not store or use gasoline or other flam-
mable vapors and liquids in the vicinity of this
or any other appliance.
- What to do if you smell gas
• Do not try to light any appliance.
• Do not touch any electrical switch.
• Do not use any phone in your building.
• Immediately call your gas supplier from a
neighbor's phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call
the fire department.
- Installation and service must be performed by a
qualified installer, service agency, or the gas
supplier.
Printed in U.S.A. Copyright 2004,
Heat-N-Glo, a brand of Hearth & Home Technologies Inc.
20802 Kensington Boulevard, Lakeville, MN 55044
This product is covered by one or more of the following patents: (United States) 4,112,913; 4,408,594; 4,422,426; 4,424,792; 4,520,791; 4,793,322;
4,852,548; 4,875,464; 5,000,162; 5,016,609; 5,076,254 5,191,877; 5,218,953; 5,328,356; 5,429,495; 5,452,708; 5,542,407; 5,613,487; (Australia)
543790; 586383; (Canada) 1,123,296; 1,297,746; 2,195,264; (Mexico) 97-0457; (New Zealand) 200265; or other U.S. and foreign patents pending.
READ THIS MANUAL BEFORE INSTALLING OR
OPERATING THIS APPLIANCE. THIS INSTALLERS
GUIDE MUST BE LEFT WITH APPLIANCE FOR
FUTURE REFERENCE.
WARNING: IMPROPER INSTALLA-
TION, ADJUSTMENT, ALTERATION,
SERVICE OR MAINTENANCE CAN
CAUSE INJURY OR PROPERTY DAM-
AGE. REFER TO THIS MANUAL. FOR
ASSISTANCE OR ADDITIONAL INFOR-
MATION CONSULT A QUALIFIED IN-
STALLER, SERVICE AGENCY, OR THE
GAS SUPPLIER.
1. This appliance may be installed in an af-
termarket, permanently located, manufac-
tured (mobile) home, where not prohibited
by local codes.
2. This appliance is only for use with the type
of gas indicated on the rating plate. This
appliance is not convertible for use with
other gases, unless a certified kit is used.
Please contact your Heat-N-Glo dealer with any
questions or concerns. For the number of your nearest
Heat-N-Glo dealer, please call 1-888-427-3973.
1
Installers Guide
Underwriters
Laboratories Listed
530-985N 4/04

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SL-550TR-C and is the answer not in the manual?

Questions and answers

Summarization of Contents

Approvals and Codes
Appliance Certification
Details testing and listing of fireplace models by laboratories.
Installation Codes
Requirements for conforming to local and national building codes.
High Altitude Installations
Guidelines for adjusting input rating for installations above 2,000 feet.
Getting Started
Introducing the Heat-N-Glo Gas Fireplaces
Overview of direct vent gas fireplaces and their operation.
Pre-installation Preparation
Important steps and checks before beginning fireplace installation.
Installing the Fireplace
Locating the Fireplace
Space and clearance requirements for placing the fireplace within a room.
Framing the Fireplace
Building the fireplace chase and framing to accommodate the unit and vent.
Installing the Vent System
Instructions for installing various vent system components and terminations.
Positioning, Leveling, and Securing the Fireplace
How to properly position, level, and secure the fireplace unit.
The Gas Control Systems
Explanation of Standing Pilot and Intermittent Pilot Ignition systems.
The Gas Supply Line
Guidelines for installing the gas supply line, including shut-off valve and connection.
Gas Pressure Requirements
Specifications for natural gas and propane inlet and manifold pressures.
Wiring the Fireplace
Electrical wiring instructions for standing pilot and IPI systems.
Finishing
Guidelines for combustible clearances around the fireplace and sealing joints.
Installing Trim, Logs and Ember Material, and Removing Shipping Support
Steps for installing trim, logs, ember material, and removing shipping supports.
Before Lighting the Fireplace
Pre-lighting checks including gas leaks, obstructions, and component checks.
Lighting the Fireplace
Final step to light the fireplace after all checks are complete.
Maintaining and Servicing Your Fireplace
Fireplace Maintenance
Overview of recommended servicing frequency and tasks.
Checking Vent System
Inspecting the external vent cap and entire vent system for proper function.
Cleaning Glass Door
Instructions for removing, cleaning, and reattaching the glass door.
Cleaning Burner and Controls
Annual cleaning of the control compartment, logs, and burner areas.
Cleaning Flame Sensor Rod (IPI Systems)
Periodic cleaning of the flame sensor rod for IPI systems.
Checking Flame Patterns, Flame Height
Visual check of flame patterns for steadiness and height.

Table of Contents