Picture Adjust; Atr; Motion Det; Privacy - JVC TK-T8101WPRU Instructions Manual

If HLC is selected, HLC is activated automatically when the camera detects high-luminance.

3.5 PICTURE ADJUST

PICTURE ADJUST allows you to adjust picture settings for optimal image. In the PICT ADJUST
submenu, you can adjust BRIGHTNESS, CONTRAST, SHARPNESS, HUE and GAIN value. In addition,
you can set MIRROR to ON to reflect the image.
.

3.6 ATR

Set ATR (Adaptive Tone-curve Reproduction) function. You can select ON or OFF. The default is OFF. If
selecting ON, you will enter the ATR submenu, where you can set LUMINACE and CONTRAST to
optimize by image.
*Also known as Wide Dynamic Range. This function expands the video dynamic range of the camera
and improves visibility of images even in high contrast environments.

3.7 MOTION DET

MOTION DET allows to detect moving objects on the screen. The default is OFF. If selecting ON, you
will enter the MOTION DET submenu. You can set up to 4 motion areas to detect moving objectives and
adjust the motion detection sensitivity from 0 to 127.

3.8 PRIVACY

PRIVACY function mask up to 8 privacy areas on the screen from video monitoring. The default setting is
OFF. If selecting ON, you will enter the PRIVACY submenu. You can configure up to 8 privacy areas and
set color and transparency of the privacy zones. In addition, you can enable MOSAIC function for the
privacy zone.
Note: If you enable MOTION DET function, then PRIVACY function will support 4 zones only.
Menu Settings
MIRROR OFF
BRIGHTNESS 000
CONTRAST 128
SHARPNESS 128
HUE 128
GAIN 128
RETURN
LUMINANCE LOW
CONTRAST LOW
RETURN
REA SEL 1/8
TOP 000
BOTTOM 000
LEFT 000
RIGHT 000
COLOR 1
TRANSP 0.00
MOSAIC OFF
RETURN
12