Samsung SCC-C7325 User Manual page 35

FAN/HEATER SETUP
FAN RUN TEMP
HEATER RUN TEMP
BACK
EXIT
• FAN RUN TEMP
Above this temperature, the blower fan will start
automatically.
Range: 30°C ~ 80°C (86°F ~ 176°F)
• HEATER RUN TEMP
Bellow this temperature, the Heater will be tuned on
automatically.
Range: -10°C ~ 20°C (14°F ~ 68°F)
FAN and HEATER are only available in C7325 model.
SET HOME POSITION
MOVE TO TARGET POSITION
[NEAR:SELECT/ FAR:CANCEL]
• SET HOME POSITION
Home Position means the origin of PAN angle
calculation. The value of PAN angle displayed on the
screen is based on this Home Position.
By using Joystick, move the camera to the desired
position and press ENTER (NEAR/SAVE).
It is noted that Home is not effective to Tilt angle.
How to use OSD Menu
If you change the location of Home position, all
horizontal locations of functions such as preset,
pattern, scan, auto pan, and privacy zone mask will
40°C
5°C
be shifted based on changed Home position.
• SET NORTH DIRECTION
You can set up North direction.
By using Joystick, move the camera to the desired
0/0/x1/N
NORTH position and press ENTER (NEAR/SAVE).
The direction will be displayed in the screen
DD is direction and will be displayed from:
* Set Home Position?
When you replace the camera block or the
orientation of camera is changed due to
maintenance operations, it is very diffi cult to
maintain same pan orientation. Therefore, all
function data depending on pan orientation such
as preset, pattern, scan, auto pan, and privacy
zone mask are not useful any more accordingly.
However, even in this case, you can reuse the data
if you redefi ne Set Home Position on the previous
Home position. It is recommendable to memorize
the target scene of current Home position.
SET NORTH DIRECTION
MOVE TO TARGET POSITION
[NEAR:SELECT/ FAR:CANCEL]
0/0/x1/N
[PAN AXIS / TILT AXIS / ZOOM / DD]
N/NE/E/SE/S/SW/W/NW
English – 35