Power Connection; Dc Power Connection - Bosch NDC-255-P Installation And Operation Manual

IP Camera 200 Series
3.3

Power connection

The camera can accept power from both the DC12V power
input and the Ethernet input at the same time. You can remove
either one of the power sources without interrupting camera
operation.
3.3.1

DC power connection

Figure 3.2 DC power connection
1.
2.
3.
When power is supplied to the camera the LED on the bottom-
front of the camera lights. (This LED can be disabled in the
Installer Options menu.)
Bosch Security Systems
1 2 3 4
Slide the plug adapter that matches your outlet socket
onto the supplied power supply.
Insert the power connector jack from the power supply
into the DC12V socket of the camera.
Connect the power supply to either a 230 VAC or a
120 VAC power supply outlet.
Installation and Operation Manual
DC 12V Ethernet Line-out
Installation | en
Line-in
AR18-09-B003 | v1.1 | 2010.05
17