Bosch NDC-255-P Installation And Operation Manual page 23

IP Camera 200 Series
Set the camera to the desired position by performing the
following steps:
1.
2.
3.
Bosch Security Systems
For horizontal adjustment (pan), loosen the locking screw
and rotate the camera module in the base. Do not rotate
more than 350°.
For vertical adjustment (tilt), loosen thumbscrews,
position camera, then gently tighten thumbscrews to
secure camera.
To obtain a horizontal horizon (for tilted ceilings or
sidewall mounting), rotate the base of the lens as
necessary to align the picture shown on the monitor. Do
not rotate more than 340°.
Installation and Operation Manual
Installation | en
AR18-09-B003 | v1.1 | 2010.05
23