Charge Your Ipod/Iphone/Ipad With The Standalone Dock - Philips DS9800W/37 User Manual

3
Open Safari on your PC/Mac, then select
'Philips_Fidelio XXX' from the bonjour
pull-down list.
• Or open the web browser on your
PC/Mac, then type in the IP address
of DS9800W (available on the router
configuration page) at the address bar.
»
The DS9800W configuration
page is displayed.
4
Select the Firmware Update tab, then
follow the on-screen instruction to enter
the next page.
5
Click Browse to select the downloaded
firmware update file, then click Open.
6
Click Upload to upload the file, then
compare the current and new file versions.
7
After you make sure that the downloaded
update file is the latest, click Ok to start
firmware update.
»
A progress bar is displayed.
8
At completion of the update process, click
Ok to confirm.
Charge your iPod/iPhone/iPad
with the standalone dock
You can charge your iPod/iPhone/iPad through
the supplied standalone docking charger.
Compatible iPod/iPhone/iPad
The docking charger supports the following
iPod, iPhone and iPad models.
Made for
• iPad 2
• iPad
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPhone
• iPod classic
• iPod 5G
• iPod 4G
22 EN
• iPod nano (1st, 2nd, 3rd, 4th, 5th, and 6th
generation)
• iPod touch (1st, 2nd, 3rd, and 4th
generation)
• iPod mini
Note
•
iPod with color display, iPod classic, and iPod with video
are not compatible with dock charging.
Load the iPod/iPhone/iPad
• Place the iPod/iPhone/iPad in the docking
charger.
• The docked iPod/iPhone/iPad begins to
charge as soon as the docking charger is
connected to AC power.
To remove the iPod/iPhone/iPad
• Pull the iPod/iPhone/iPad out of the
docking charger.