Related Manuals for Epson EW-M970A3T
Summarization of Contents
CHAPTER 1: Introduction
1.1 Features
Overview of printer capabilities and technology.
CHAPTER 2: PAPER TYPES AND SIZES Media Specification
2.1. Paper Sizes for this printer
Lists available paper sizes supported by the printer.
2.1.1 Paper Types
Details various types of paper supported for printing.
2.2. Paper Size and Orientation
Details paper dimensions and orientation options for various paper types.
2.3. Printable Area
Defines the printable and non-printable regions on the paper.
2.3.1 Printing Area (Standard)
Specifies the standard printable area dimensions in dot units.
2.3.2 Printing Area (Zero margin/ Borderless)
Details printable area for zero margin or borderless printing.
2.4 Enable paper size of zero margin printing
Lists paper sizes compatible with zero margin printing.
2.5 Enable paper size of duplex printing
Lists paper sizes compatible with duplex printing.
CHAPTER 3: Printing Option
3.1. Printing Quality
Describes the different printing quality levels available.
3.2 Recommended Settings for Color and Monochrome Printing
Provides recommended print settings for various media types.
3.2.1. Recommended Setting Modes
Recommended settings for Windows OS users in most regions.
3.2.2. Recommended Setting Modes (Black&Color)
Recommended settings for Macintosh OS users in most regions.
3.2.3. Recommended Setting Modes (Black&Color)
Recommended settings for Japan region users on Windows/Macintosh.
CHAPTER 4: COMMAND SEQUENCE
4.1 Raster Graphics Modes
Explains the available modes for transferring raster graphics data.
4.2 Command Transfer Procedure
Details the sequence of commands for data transmission.
4.2.1 Command transfer sequence for non-compressed and the run-length encoded compression modes
Details command sequences for graphics data transmission modes.
4.3 Limitations of Command Settings
Lists constraints and rules for using printer commands.
4.4 Raster Graphics Data Format
Explains the format for raster graphics data, including nozzle alignment.
CHAPTER 5: INDIVIDUAL COMMAND SPECIFICATIONS
5.1.1 Exit Packet Mode
Command to exit EPSON packet mode for communication.
5.1.2 Initialize printer ESC @
Command to initialize the printer to its default settings.
5.1.7 Set absolute horizontal print position ESC $ nL nH
Command to set an absolute horizontal print position.
5.1.18 Monochrome Mode / Color Mode Selection ESC (K nL nH m n
Command to select monochrome or color printing mode.
CHAPTER 6: REMOTE MODE
6.1 Remote Mode Language Description
Overview of EPSON's bi-directional Remote Mode language.
6.1.1 Enter Remote Mode (Remote Mode) ESC (R 08H 00H 00H "REMOTE1"
Command to enter Remote Mode from ESC/P or ESC/P2.
6.1.2 Load Power-On Default NVR into RAM (Remote Mode) "LD" 00H 00H
Loads default printer settings from NVR into RAM.
6.1.3 Set printer timer (Remote Mode) " TI" 08H 00H 00H YYYY MM DD hh mm ss
Command to set the printer's internal timer with date and time.
6.1.4 Set horizontal print position (Remote Mode) “FP” 03H 00H 00H m1 m2
Command to set horizontal print start position, including borderless options.
6.1.5 Turn printer state reply on/off (Remote Mode) “ST” 02H 00H 00H m1
Command to enable or disable printer status reporting to the host.
6.1.6 Job name set "JH" nL nH 00H m1 m2 m3 m4 m5
Command to set a job name, specifying its type and ID.
6.1.7 Start job "JS" nn 00H 00H ml
Command to start a print job, setting print data parameters.
6.1.8 End job “JE” 01H 00H 00H
Command to terminate the current print job.
6.1.9 Paper Feed Setup "SN" 01H 00H 00H
Command to change mechanical paper feed sequences from default.
6.1.10 Select paper path "PP” 03H 00H 00H m1 m2
Command to select the paper path for temporary default settings.
6.1.11 Select paper media “MI” 04H 00H 00H m1 m2 m3
Command to select the paper media type for temporary default settings.
6.1.12 Select Duplex Printing "DP" 02H 00H 00H m1
Command to select or disable duplex printing mode.
6.1.13 Set drying time "DR" 04H 00H 00H m1 m2 m3
Command to set the drying time for print jobs.
6.1.14 User Setting "US" 03H 00H 00H m1 m2
Command to set user-defined printer settings like margins and print mode.
6.1.15 Terminate Remote Mode (Remote Mode) ESC 00H 00H 00H
Command to exit Remote Mode and return to printer control language.
CHAPTER 7: STATUS REPLY CODE SPECIFICATION
7.1 Status code
Specifies the codes indicating the printer's current status.
7.2 Error code
Lists the codes for various printer error conditions.
7.3 Warning code
Details the codes indicating warning conditions, such as low ink.
7.4 Paper path
Provides codes indicating the current paper path status.
7.5 Paper mismatch error
Lists codes for paper size and type mismatch errors.
7.6 Cleaning time information
Provides codes for cleaning or ink filling time in seconds.
7.7 Ink remain information
Provides codes indicating ink levels and cartridge status.
7.8 Ink information
Details codes for ink cartridge name, color, and remaining ink levels.
7.9 Cancel code
Specifies codes related to print job cancellation requests.
7.10 Job name Information
Provides information about job names and their associated parameters.
7.11 Paper Jam error information
Lists codes indicating the cause and location of paper jams.
7.12 Media error information
Details codes for errors related to media insertion or printing side.
CHAPTER 8: Device ID
Model Name
Lists printer model names and their corresponding regions/markets.
Need help?
Do you have a question about the EW-M970A3T and is the answer not in the manual?
Questions and answers