OPERATING HEATER
Continued
14
1. Slide selector switch on remote receiver to
the REMOTE position.
2. Slightly pull and turn auxiliary knob so the
AUX is to the left and right and ON is to the
top and bottom positions.
3. Light the pilot. Follow steps 1 through 6
under Lighting Instructions, page 13.
DISPLAY
The LCD display on the remote control indi-
cates current room temperature in Fahrenheit
or Celsius. The small flame indicates burner/
valve in operation. ROOM indicates remote
is in thermo operation. TEMP appears during
manual operation. SET appears during the
time of setting the desired temperature in the
thermostatic operation.
Changes heater
from Manual
Mode to
Thermostatic
Mode
Sets
temperature in
Thermostatic
Mode
www.desatech.com
HAND-HELD REMOTE
CONTROL OPERATION
ROOM
SET
TEMP
ON
OFF
MODE
SET
F
Turns
heater
ON
Turns
heater
OFF
113261-01C