IDEAL independent 30 User Manual
Hide thumbs
Also See for independent 30:
- Installation and servicing (68 pages) ,
- User manual (72 pages)
Table of Contents
Advertisement
Quick Links
USERS
INDEPENDENT systeM
15 18 24 30
For Installation Guide see reverse of book
When replacing any part on this appliance, use only spare parts that you can be
assured conform to the safety and performance specification that we require.
Do not use reconditioned or copy parts that have not been clearly authorised by Ideal.
For the very latest copy of literature for specification and maintenance practices visit our
website www.idealboilers.com where you can download the relevant information in PDF format.
Advertisement
Table of Contents
Related Manuals for IDEAL independent 30
Summarization of Contents
Boiler Safety and Operation
Gas Safety Regulations
Mandatory installation by a Gas Safe Registered Engineer as per current regulations.
Electricity Supply Requirements
Specifies the required electrical supply voltage, frequency, and fuse rating.
Important User Notes
Crucial warnings and advice for safe and correct appliance operation.
Minimum Clearances for Servicing
Required space around the boiler for installation and maintenance.
Boiler Lighting Procedure
Step-by-step guide on how to safely ignite the boiler.
Boiler Reset Procedure
Instructions on how to reset the boiler in case of shutdown.
Boiler Controls and Operation
Central Heating Temperature Control
Adjusting the radiator temperature for optimal heating.
Economy Mode
Setting the boiler for efficient operation in milder conditions.
Weather Compensation
How weather compensation affects room temperature control.
Frost Protection
Measures to prevent the boiler from freezing during cold weather.
Boiler Overheat Protection
How the boiler prevents damage from overheating.
Loss of System Water Pressure
Troubleshooting low system pressure and re-pressurising the boiler.
Condensate Drain and Gas Safety
Defrosting a Frozen Condensate Pipe
Instructions for safely thawing a blocked condensate pipe.
Preventative Solutions for Cold Weather
Tips to prevent issues during cold periods.
Escape of Gas Procedure
Immediate actions to take if a gas leak is suspected.
Cleaning the Appliance
Recommended methods for cleaning the boiler exterior.
Annual Maintenance
Requirement for yearly servicing by a qualified engineer.
Troubleshooting Common Issues
No Central Heating
Flowchart to diagnose and resolve central heating problems.
No Hot Water
Flowchart to diagnose and resolve hot water supply issues.
Boiler Operation Modes
Standby Mode
Boiler awaiting a heating or hot water demand.
Temperature Reached
Boiler has met the set temperature demand.
Heating/Hot Water Operation
Boiler actively providing central heating or hot water.
Frost Mode Operation
Boiler operating to prevent freezing.
Fault Codes and Actions
Boiler Chip Card (BCC) Not Fitted
Action for a missing or faulty boiler control card.
Outside Sensor Failure
Action for a faulty external temperature sensor.
Low Mains Voltage
Action to take if the mains voltage is too low.
PCB Fault
Action for a general fault with the printed circuit board.
5 Boiler Resets in 15 minutes
Troubleshooting repeated boiler reset attempts.
False Flame Lockout
Action for a false flame detection error.
BCC Activation Fault
Action for an error during boiler control card activation.
BCC Fault
General fault code related to the boiler control card.
Low Water Pressure
Action for low water pressure within the heating system.
Flow Temperature Overheat
Action for an overheat condition detected in the flow.
Flame Loss
Action for a flame failure during operation.
Fan Fault
Action for a fault detected with the boiler's fan.
Control / No Flow Thermistor
Action for a fault with the thermistor or flow sensor.
Return Thermistor
Action for a fault with the return water thermistor.
Need help?
Do you have a question about the independent 30 and is the answer not in the manual?
Questions and answers