Advertisement
Quick Links
WIRELESS-MICROPHONE SYSTEMS
CPR30 – Frequencies programming
Remove CPR30 battery pack: to do it remove "AA" cells and remove two screws near the corners of battery pack. Extract battery pack.
Insert UPK32/100 connector on ST3 (ST3 before used by battery pack).
After a successfully programming, disconnect UPK32/100 and remount CPR30 battery pack.
CPR30-howtoprogramCS029112.doc
WISYCOM S.r.l.
•
Via Spin, 156
•
I-36060 Romano d'Ezzelino (VI)
•
Italy
Tel. +39 0424 382605
•
Fax +39 0424 382733
•
www.wisycom.com
•
e-mail: sales@wisycom.com
Advertisement
Need help?
Do you have a question about the MCR40 and is the answer not in the manual?
Questions and answers