Related Manuals for Bomag BW 174 AP-4
Summarization of Contents
Confirmation of Changes
Document History
Details the version history and changes made to the document.
Software History
Outlines the software versions and their release details.
Component Replacement Procedures
Replacing the ESX Control Unit
Step-by-step guide for replacing the ESX control module.
Replacing the Data Collector Module
Procedure for replacing the A80 data collector module.
Components Not Requiring Adjustment
Lists components that can be replaced without a follow-up adjustment.
ESX Control Functions and Operation
Display Functions and Operation
Explains the general display functions and operational modes.
Accessing Service Mode
Detailed steps to enter the service mode via input buttons.
Entering Input Codes
Procedure for inputting service and diagnostic codes.
Brake Efficiency Testing
Procedure for testing brake efficiency against closed brake.
Setting the Machine Type
Instructions for setting the correct machine type in the control.
Adjusting the EGAS Actuator
Steps for proper adjustment of the EGAS actuator.
Adjusting the Slope Sensor
Procedure for correctly adjusting the slope sensor.
Calibrating Angle Transducers
Detailed steps for calibrating the front and rear angle transducers.
Adjusting Angle Transducers
Procedure for adjusting the angle transducer positions.
Surge Current Detection on Steering Valves
Automatic detection of surge currents for steering valves.
Surge Current Detection in Travel System
Automatic detection of surge currents for the travel system.
Fault Log Management
Procedures for displaying and deleting stored faults.
Adjusting Chip Spreader Type
Configuration steps for the chip spreader type.
Activating Edge Cutting Units
Procedure for activating and configuring edge cutting units.
Electronic Module Signal Descriptions
ESX Control Signals
Detailed description of signals connected to the ESX control.
Data Collector Signals
Description of input and output signals for the data collector.
Travel Lever Signals
Description of signals from the travel lever assembly.
Display Module Signals
Details of signals for display modules and gauges.
BLM IO Module Signals
Description of signals for the BLM IO module.
ESX Control Fault Codes and Reactions
Fault Code Overview
A summary list of fault codes and their general categories.
Fault Reaction Descriptions
Explanation of different fault reaction types and their impact.
Note Codes
Lists note codes which are informational and do not require service action.
Need help?
Do you have a question about the BW 174 AP-4 and is the answer not in the manual?
Questions and answers