Table of Contents
Advertisement
English Version of the German Original Operating Instructions
3Demax
D20+
P20+
SheraPrint 20
These operating instructions must be read and understood before operating the machine.
Rapid Shape GmbH │ Roemerstr. 21 │ 71296 Heimsheim │ Germany
Phone +49 (0)7033 309 878 0 │ Fax +49 (0)7033 309 878 40 │ www.rapidshape.de
DOCR000225
Advertisement
Table of Contents
Related Manuals for Rapid Shape P20+
Summarization of Contents
Safety Information
Symbols
Explains hazard symbols and their meanings.
Safety Information
Electrical Safety Precautions
Details safety measures related to electric shock hazards.
Safety Information
UV Radiation and Hand Injury Warnings
Covers dangers from UV radiation and moving parts.
Safety Information
Environmental and Overheating Warnings
Details risks from environmental factors and overheating.
General Information
Conformity, Application, and Intended Use
Manufacturer conformity, scope of instructions, and system purpose.
General Information
Operator Duties and Responsibilities
Outlines responsibilities of the operator and personnel.
Technical Data
Conversion, Spare Parts, and Repair
Rules for technical alterations, repairs, and service.
Technical Data
Delivery Scope
Lists items included in the machine's delivery.
Technical Data
Machine Components Overview
Identifies and illustrates the main components of the machine.
Transport
General Transport and Damage Procedures
Guidelines for safe transport and reporting damage.
Preparations
Installation Site Requirements
Specifies conditions and environment for machine installation.
Preparations
Additional Equipment and Materials
Lists essential equipment and material information.
Preparations
IT Requirements
Details hardware, software, and network needs for the system.
Getting Started
Unpacking, Setup, and Connection
Instructions for unpacking, positioning, and connecting the machine.
Getting Started
Machine Startup and First Test Print
Steps to start the machine and perform an initial test print.
Getting Started
Netfabb Software Workflow
Covers installation, setup, material, slicing, and data transfer using Netfabb.
Operation
Material Reservoir and Platform Preparation
Preparing the material reservoir and building platform for printing.
Operation
Inserting Components and Starting Print Jobs
Steps for inserting, starting, and managing print jobs.
Operation
Component Cleaning and Post-Curing
Procedures for cleaning and post-curing printed components.
Operation
Calibration and Machine Information
Covers LED calibration and accessing machine info.
Operation
Parallelism Adjustment and Settings
Adjusting platform parallelism and accessing system settings.
Cleaning and Maintenance
Daily Cleaning Procedures
Daily cleaning tasks for the machine components.
Cleaning and Maintenance
Regular Customer Maintenance
Customer maintenance tasks before, daily, and weekly.
Cleaning and Maintenance
Manufacturer Maintenance Information
Information on extensive maintenance performed by the manufacturer.
Service
Contacting the Service Team
Information about contacting the Rapid Shape service team for support.
Final Decommissioning
Shutting Down and Storing the Machine
Procedures for safely powering down and storing the machine.
Disposal
Machine Disassembly and Disposal
Instructions for disassembling and disposing of the machine.
Need help?
Do you have a question about the P20+ and is the answer not in the manual?
Questions and answers