Table of Contents
Related Manuals for Rapid Shape P30+
Summarization of Contents
Safety
Symbols in this manual
Explains the various safety symbols used throughout the manual to indicate hazards.
Intended use
Defines the proper operational scope of the 3D printing system and lists prohibited uses.
Safety equipment
Details the necessary safety equipment and checks required for safe operation.
Attached safety markings
Explains the meaning and importance of safety labels affixed to the machine.
Residual risks
Lists potential dangers that remain after safety measures, requiring user caution.
Overview
Machine assembly / Operating elements
Identifies the main components and operating controls of the 3D printer.
Serial plate
Provides details on the machine's identification, technical data, and serial number.
Transport & storage
Safety during transport
Outlines safety precautions and risks associated with moving heavy equipment.
Transporting the machine
Step-by-step instructions for properly lifting and moving the machine.
Unpacking the machine
Guides on safely removing the machine from its transport packaging.
Scope of delivery
Lists the standard contents included with the 3D printing system.
Storing the machine
Specifies recommended conditions for storing the machine.
Installation
Installation safety
Highlights critical electrical safety warnings during the installation process.
Setting up
General procedures for setting up the machine.
Requirements for the installation location
Details environmental and technical prerequisites for the installation site.
Setting up the machine
Provides step-by-step instructions for the physical placement of the machine.
Connecting
Guides users through connecting the machine to power and network sources.
Preparation
Required accessories
Lists essential accessories needed for printing and post-processing.
Print Accessories
Specifies the consumable print supplies required to start a print job.
IT requirements
Outlines PC hardware and software specifications for print data creation.
Netfabb
Identifies Netfabb as the required slicing software for print file processing.
User interface
General
Introduces the touch display interface and connection options for input devices.
Main Menu
Describes the Home screen and navigation options after machine startup.
Select Job
Explains how to choose and start print jobs from the machine's interface.
More Functions
Details access to additional features like reservoir cleaning and maintenance.
Calibration
Describes the process of calibrating the machine's exposure unit.
Setup
Covers managing jobs, network settings, and accessing the service menu.
Information
Explains how to view machine status and network details.
Operation
Safety during operation
Highlights crucial safety warnings related to moving parts, sharp objects, and UV radiation.
Switching on the machine
Provides step-by-step instructions for powering on the 3D printer.
Open and close the machine
Details the procedures for automatic and manual operation of the machine's hood.
Prepare the machine for printing
Guides on setting up the material reservoir and building platform before printing.
Print job
Explains how to select and initiate single or multiple print jobs.
Pause/end job
Describes how to pause or prematurely end a running print job.
Peel off job
Details the automatic process of separating printed components from the building platform.
Remove job
Provides instructions on how to safely remove printed components from the machine.
Post-process job
Details the cleaning and curing steps required after printing.
Check the job
Explains how to inspect printed components for desired results.
Decommissioning
Switching off the machine
Step-by-step instructions for properly shutting down the machine.
Shut down the machine for a long time (> 1 month)
Procedures for long-term shutdown, including storage recommendations.
Cleaning & maintenance
Safety during cleaning and maintenance
Highlights safety precautions for maintenance tasks, including electrical and UV hazards.
Clean protective glass
Procedure for cleaning the machine's protective glass to ensure print quality.
Clean material reservoir
Details the process for cleaning both filled and empty material reservoirs.
Clean building platform
Guides on cleaning the building platform to ensure proper component adhesion.
LED calibration
Describes the automatic calibration of the LED exposure unit.
Automatic reservoir cleaning
Details the automated process for removing polymerised material from the reservoir.
Change and clean blade
Provides instructions on changing and cleaning the blade for material integrity.
Check & adjust parallelism
Details the procedure for checking and adjusting the building platform's parallelism.
Disassembly & disposal
Safety instructions for disassembly & disposal
Crucial safety warnings for disassembly and disposal, including electrical and sharp object hazards.
Disassemble the machine
Step-by-step guide for safely taking apart the machine.
Dispose of the machine
Provides guidance on environmentally responsible disposal of the machine.
Technical details
Operating data
Presents key performance specifications like power, noise level, and temperature ranges.
Dimensions and weights
Lists the physical dimensions and weight of the machine.
Connections
Details electrical system, Ethernet, and media port specifications.
Serial plate
References the location and content of the machine's serial plate.
Need help?
Do you have a question about the P30+ and is the answer not in the manual?
Questions and answers