MAGIMIX LE BLENDER Instruction page 4

HOW TO DISASSEMBLE AND CLEAN
CIRCUIT BREAKER OPERATION
You will find a small, square, red plastic button located on the underside of the motor
base of some models.
This is the reset button for a circuit breaker which prevents the motor from overheating
in the case of an overload.
If an overload occurs, the circuit breaker will shut off the motor and cause the red button
to protrude slightly from its normal position.
To reset the circuit breaker, and resume operation, do the following :
1 - Set the power switch to its off (O) position.
2 - Unplug the power cord from electrical outlet.
3 - Determine the reason for the overload, and eliminate the cause (for example : reduce
the amount of material being processed).
4 - Push the red reset button back in to its normal position.
5 - Plug the power cord back into electrical outlet.
6 - Resume normal operation.
We reserve the right to alter at any time without notice the technical specifications of this appliance.
The blade can not be removed from the bowl.
Parts marked " * " are dishwasher safe, others must
Measuring Cap
be hand washed. After cleaning and drying, reas-
semble as shown on drawing.
Lid
To clean the motor base, unplug the power cord,
wipe the surface with a damp cloth first, then with
a dry cloth.
*
Jug
Motor base
UNITED KINGDOM AND IRELAND
115 A High Street
Godalming, Surrey GU7 1AQ
Telephone: 0483 427411 - Fax: 0483 427414
© All rights reserved for all countries by Magimix.
26