MAGIMIX LE BLENDER Instruction page 2

Electrical Instructions
WARNING :
a plug with bared flexible cord is hazardous if engaged in a live
socket. If the fitted plug has been cut from the power supply cord, it should be
destroyed and replaced with an appropriate three pin plug in accordance with the follo-
wing code : BLUE : neutral
BROWN : live
GREEN/YELLOW : earth
The wire which is coloured BLUE must be connected to the terminal in the plug which is
marked with the letter "N" or coloured BLUE or BLACK.
The wire which is coloured BROWN must be connected to the terminal in the plug which
is marked with the letter "L" or coloured BROWN or RED.
The wire which is coloured YELLOW should be connected to the terminal marked with the
letter "E", or by the earth symbol
ELECTRICAL INSTRUCTIONS
• Before using your Blender ensure that the voltage indicated on the base corresponds
with the mains voltage in your home.
• Before starting, make sure that the Blender switch is in off position "O".
Do not place the jug on the base or take it off while the motor is running. To do so
may damage the drive shaft or blending assembly.
L B
e lender
or coloured GREEN or GREEN/YELLOW.
Before placing the jug on the motor base, make sure that the
motor is turned off and it is at a complete stop. Place the jug
assembly on the base so that it is firmly seated and not tilted to
one side.
24