Related Manuals for J&M 810
Summarization of Contents
To The Dealer
EXPRESS WARRANTY
Details warranty coverage, terms, and conditions for the grain cart.
SERVICE
Guidelines for using authorized service centers and genuine J&M parts.
General Information
TO THE OWNER
Instructions for safe operation and understanding safety alert symbols.
General Information
BOLT TORQUE CHART
Torque values for various bolt sizes and grades for proper assembly.
TIGHTENING WHEEL NUTS
Procedures for proper wheel nut tightening and checking.
Safety Rules
SAFETY DECALS
Identification and description of safety decals for hazard awareness.
OPERATING INSTRUCTIONS
Step-by-step guide for initial operation of the grain cart.
Initial Operation and Maintenance
TIRE PRESSURE
Recommended tire inflation pressures for various tire sizes.
Operating Instructions
WHEEL NUTS
Proper torque and checking procedures for wheel nuts.
LIGHTING AND SAFETY DECALS
Checks for proper lighting and decal placement on the grain cart.
Preparing the Grain Cart for Use
Tractor HP requirements and pre-operation checks.
Tow Loads Safely
Guidelines for safe towing of the grain cart.
Road Travel (grain cart empty)
Recommendations for safe road travel with an empty grain cart.
Safety Chain User Instruction
Proper attachment and use of the safety chain.
Operating Instructions (Continued)
Adjusting Row Spacing For Walking Tandem Duals
Steps to adjust row spacing for walking tandem dual wheel systems.
Lubrication Service Schedule
Routine Maintenance
Regular checks and maintenance tasks for the grain cart.
Adjusting the Lower Flighting
Adjusting the Upper Flighting
Procedures for adjusting the upper auger flighting.
Storage Preparation
Removing From Storage
Procedures for taking the grain cart out of storage.
Repair Parts List and Diagrams
WHEEL RIMS FOR GRAIN CARTS
Part numbers for various wheel rims used on grain carts.
TIRES FOR GRAIN CARTS
Part numbers for various tires used on grain carts.
130 Degree Gearbox Assembly for 22" Diameter Augers (WEASLER)
130 Degree Gearbox Assembly for 18" & 20" Diameter Augers (SUPERIOR)
Parts breakdown for the 18" & 20" diameter auger gearbox.
HUB & SPINDLE ASSEMBLY 250-10
Power Take-Off (PTO) Shaft Assembly
Parts for the Power Take-Off (PTO) shaft assembly.
HUB & SPINDLE ASSEMBLY W-891
HUB & SPINDLE ASSEMBLY W-881
Parts for the W-881 hub and spindle assembly.
Door Wheel Assembly
Inspection Windows
Parts for the inspection windows on the grain cart.
Hitch Assembly
Parts for the grain cart's hitch assembly.
Walking Tandem Dual Wheel Assembly
Auger Rest Assembly
Parts for the auger rest assembly.
WEIGH SCALE SYSTEMS
For Models 1110 Grain Carts Digi-Star Scale System
Digi-Star scale system parts for 1110 model grain carts.
For Models 1310 and 1410 Grain Carts Weigh-Tronix Scale Systems
Weigh-Tronix scale system parts for 1310/1410 grain carts.
Digi-Star 5-Point Scale System For Single Wheel Applications with Bolt-on Axles
5-point scale system parts for single wheel models.
Digi-Star 5-Point Scale System Hardware for Single Wheel and Track System Bolt-on Axles
Hardware components for weigh scale systems.
Ladder Assembly
Bolt-On Frames (810 & 1010)
Parts for the bolt-on frames specific to 810 & 1010 models.
Lower Auger Assembly
Torsion Arm
Parts related to the torsion arm of the lower auger.
Hydraulic Cylinders
Fold Cylinder
Parts for the hydraulic fold cylinder.
Tip-Spout Cylinder
Parts for the hydraulic tip-spout cylinder.
Feed Gate Cylinder
Parts for the hydraulic feed gate cylinder.
Need help?
Do you have a question about the 810 and is the answer not in the manual?
Questions and answers