Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Helmer iLF105-GX
Summarization of Contents
About this Manual
Intended Audience
Information on who the manual is for and the scope of the freezers covered.
Model Reference
Explains how freezer models are identified by their distinguishing model numbers.
Intended Use
Specifies that Helmer freezers are for storing blood products and other medical/scientific products.
Safety Symbols and Precautions
Details symbols used in the manual and on the unit to convey important safety information.
Avoiding Injury
Provides critical instructions and warnings to prevent personal injury during operation and maintenance.
General Recommendations
Offers general advice on freezer use, initial loading, and product storage for optimal performance.
Installation
Location
Criteria for selecting an appropriate installation location, focusing on ventilation and environmental factors.
Placement and Leveling
Guides users on correctly positioning and leveling the freezer for stability and efficient operation.
Stacked Undercounter Units
Specific instructions for safely installing stacked undercounter freezer units, including bracing.
AC Power Cord
Instructions for correctly connecting the AC power cord to the freezer unit.
Temperature Probes
Detailed steps for preparing and installing temperature probe bottles for accurate temperature monitoring.
Chart Recorder (if included)
Instructions for setting up and using the optional chart recorder for temperature data logging.
i.Series® Operation
Initial Power-up
Steps for powering on the i.Series freezer, including battery setup and system boot-up procedures.
Operation
Overview of the i.C³ interface, home screen, and screensaver functions for daily use.
Change Temperature Setpoint
Procedure to adjust the freezer's temperature setpoint using the control interface menus.
Set Alarm Parameters
Instructions for configuring alarm settings, such as high/low temperature limits and time delays.
Active Alarms
Explanation of common alarms displayed on the i.C³ Home screen and their meanings.
Mute Active Alarms
How to temporarily silence audible alarms using the mute function or adjusting sound settings.
Min/Max Temperature Monitoring
Min/Max Temperature Monitoring
How to view and manually reset the highest and lowest temperature readings recorded by the unit.
i.Series® Access Control (Optional)
Setup
Procedure for setting up user accounts and supervisor PINs for secure freezer access.
Open Freezer with Access Control
Steps to enter the correct PIN code via the keypad to unlock and open the freezer.
Horizon Series™ Operation
Initial Power Up
Steps for initial power-up of the Horizon Series freezer, including battery and alarm switch configuration.
Display Minimum and Maximum Monitor Temperature Recordings
How to view minimum/maximum temperature occurrences and the elapsed time since the last reset.
Clear minimum and maximum temperature recordings.
Procedure to reset the recorded minimum and maximum temperature values and the associated timer.
Change Freezer Temperature Setpoint
Instructions for changing the freezer's temperature setpoint using the control panel buttons.
Set Parameter Values
Guide to entering program mode to adjust various operational parameters like temperature units and offsets.
Set Temperature Units
Steps to select between Celsius and Fahrenheit for temperature display and settings.
Set Alarm Setpoints (Parameters)
Procedure to adjust alarm setpoints for high and low temperature conditions on the Horizon Series.
Temperature Calibration Offsets
Explanation of temperature calibration offsets and when to consult the service manual for adjustments.
Active Alarms
List and description of active alarms for Horizon Series freezers, including error codes.
Mute and Disable Audible Alarms
Methods for muting audible alarms temporarily or disabling them permanently using the key switch.
Horizon Series™ Access Control (Optional)
Setup
Instructions for managing user access codes, including adding and deleting users with a master code.
Open Freezer with Access Control
Steps to enter a user code followed by '#' to unlock and open the Horizon Series freezer.
Product Specifications
Operating Standards
Details environmental operating conditions, altitude, humidity, and regulatory standards for the freezers.
Compliance
Safety Compliance
Information regarding compliance with medical device directives and various safety certifications.
Environmental Compliance
Compliance with RoHS and WEEE directives, including guidance on product disposal and recycling.
EMC Compliance
FCC compliance for radiated and conducted emissions, specifying the intended electromagnetic environment.
Need help?
Do you have a question about the iLF105-GX and is the answer not in the manual?
Questions and answers