Advertisement
Advertisement
Table of Contents
Related Manuals for Bradford White RE2H50S10
Summarization of Contents
General Information and Safety Precautions
Critical Safety Warnings
Alerts users to critical safety hazards and precautions for operating the appliance.
Important Installation Notes
Provides essential pre-installation checks and region-specific installation mandates.
Control Panel Overview
Control Features Explained
Details the functions and operation of the water heater's control panel and its components.
Operational Modes
Heat Pump (Only) Mode
Describes the most energy-efficient mode, utilizing ambient air for heating.
Hybrid Mode
Explains the combined heat pump and electric mode for balanced efficiency and recovery speed.
Electric (Only) Mode
Details the mode using only resistance elements for faster recovery, with higher energy use.
Vacation Mode
Outlines the energy-saving mode for periods when the unit is not in use.
Temperature Adjustment and Safety
Scald Hazard Awareness
Highlights the risks of scalding from high water temperatures and provides safety advice.
Installation Instructions
Locating the Water Heater
Guidance on selecting a suitable location for the water heater, considering safety and accessibility.
Recommended Clearances
Specifies required clearances around the unit for performance and service access.
Minimum Required Clearances
Details minimum spatial requirements for installation and access, including diagrams.
Thermal Expansion Management
Explains thermal expansion and the need for an expansion tank in closed systems.
Water Supply Connections
Safety Controls
Details the temperature-limiting control (TCO) and how to reset it.
Temperature and Pressure Relief Valve
Discusses the importance and installation of the T&P relief valve for safety.
Filling the Water Heater
Step-by-step instructions on how to properly fill the water heater tank.
Electrical Connections
Branch Circuit Sizing Guide
Provides a guide for selecting appropriate circuit breakers and wire sizes based on wattage.
Installation Checklist
A checklist to ensure all installation steps and requirements are met before operation.
General Operation
Normal Startup in Hybrid Mode
Describes the sequence of events during the initial startup of the unit in Hybrid Mode.
Maintenance Procedures
Draining and Flushing the Water Heater
Instructions on how to drain and flush the tank for sediment removal.
Cleaning the Filter
Details on how to clean the air filter to maintain efficiency and prevent errors.
Anode Rod Maintenance and Service
Guidance on inspecting and replacing the anode rod to protect the tank and warranty.
Frequently Asked Questions
Filter FAQs
Answers common questions about the filter's purpose and cleaning.
Mode FAQs
Explains the different operating modes (Heat Pump, Hybrid, Electric, Vacation).
Operation FAQs
Addresses common queries regarding unit operation, noises, and display behavior.
Fault Codes
Fault Code Descriptions
Lists and explains various fault codes displayed by the unit for troubleshooting.
Need help?
Do you have a question about the RE2H50S10 and is the answer not in the manual?
Questions and answers