LG GR-K20SVZ Technical Manual page 15

MICOM Function and Description of Circuit
2) Food Storage/Maturation Function
(1) Selection of Food Storage Function
Press
Lock/Unlock
to release lock
1. Press Lock/Unlock to release the lock.
2. Select Type of Food to keep and temperature.
3. If you wait more than 60 seconds, the Food Storage cycle begins by default.
4. Cabbage-Kimchi/Stand is the default unless you change it during the Keeping of Food process.
(2) Selection of Maturation Function
Press
Lock/Unlock to
release lock
1. Press Lock/Unlock to release the lock.
2. Select a type of Kimchi and a Ripening degree by pressing the appropriate buttons and cycling
through the choices.
3. If you press Lock/Unlock once or wait more than 60 seconds, the Ripening Cycle begins.
4. The display counts down the time remaining in the cycle as ripening progresses.
5. The compressor switches on or off depending on the ambient temperature and the temperature in
the compartments of the storage. Additionally, the 3-way valve operates and the ripening heater
turns on and off.
6. As the ripening process completes (45~102 hours,) the setting defaults to the
Kimchi/Mid status and the kimchi is kept in cold storage.
7. At the end of the ripening process, the display shown 0 Day/00 Time Remaining Ripening Time.
Press the Lock/Unlock button once to turn the display off.
8. When switching from ripening to storage, the default temperature is set to Mid.
9. A ripening cycle cannot be selected when Fruits&Vegetables, Meats& Fish, or Frozen Food is
selected. These are Storage Cycles.
Select Type
of Food
Select Type
of Food
15
Select
temperature
section
Select
Ripening
degree
Press
Lock/Unlock
button once
Cycle
Begins
Wait
60 seconds
Press
Lock/Unlock
button once
Cycle
Begins
Wait
60 seconds