Advertisement
ALLOWING
COOLING
TIME
BEFORE
USE
To ensure reliable food storage, allow you r refrigerator and freezer to operate with the doors closed for 8 to 12 hours before
placing food inside. During this cooling period, you do not need to adjust the controls, which are preset at the factory.
SETTING
COOLING
TEMPERATURES
Your refrigerator comes with a state-of-the-art electronic digital control system. The system's control panel is located at the
top of the the fresh food compartment.
The two digital displays on the left half of the control panel indicate the current settings or temperatures of your freezer and
fresh food compartments. The 2 gauges located on the front of the refrigerator just above the Ice and Water Dispenser also
give you the current temperatures for the freezer and fresh food compartments.
To adjust the temperatu re to a higher or lower setting, press the Up (Cold) or Down (Colder) button closest to the display.
The first time you press the button, the display shows current setting you entered. Each press of the button after that
changes the setting by one.
The display shows your new setting momentarily, then changes back to the current temperature.
Cold
Air
Refrigerator
Alarm
Filter
On @
DoerAjar
_
......
_
FiJterOl(
N/
mgh a.n_ @ Reset
gl_f :: G Ord_Fl_
Colder
Mode
Colder
PowerFaihre
_
@ ChangeF[Iter
%.
(Temperature Display : Features may vary.)
Q
Freezer Gauge
Refrigerator Gauge
(Gauges will operate in Fahrenheit only)
CHOOSING
FAHRENHEIT
OR CENTIGRADE
Depending on which temperature standard you prefer to use,
you can set your control panel to display in fahrenheit or.
centigrade. To change between fahrenheit and centigrade,
press the Mode button (located between the two digital
temperature displays).
Cold
Freezer
Cdd
Refrigerator
.........
Colder
Mode
Colder
1
]
Press to alternate between
Fahrenheit and Centigrade
Advertisement
