Installation Checklist - Electrolux E32AF75JPS Use And Care Manual

22 Solutions To Common Problems
Problem
Sound And Noise (Continued)
Popping or cracking
sound when
compressor comes on.
Bubbling or gurgling
sound.
Vibrating or rattling
noise.
Water / Moisture / Frost Inside Freezer
Moisture forms on
inside
Freezer walls.
Odor In Freezer
Odors in Freezer.
Door Problems
Door will not close.
Lighting Problems
Light is not on.
Doors
 Handles are secure and tight
 Door seals completely to cabinet on all sides
 Freezer door is level across the top
Leveling
 Freezer is level, side-to-side and front-to-
back
 Toe grille is properly attached to freezer
 Cabinet is setting solid on all corners
Cause
* Metal parts undergo expansion and
contraction, as in hot water pipes.
* Freezer (used to cool refrigerator is
circulating throughout the system.
* Freezer is not level. It rocks on the
fl oor when it is moved slightly.
* Floor is uneven or weak.
* Freezer is touching the wall.
* Weather is hot and humid, which
increases internal rate of frost buildup.
* Door is slightly open.
* Door is kept open too long or is
opened too frequently.
* Interior needs to be cleaned.
* Foods stored in Freezer have strong
odors.
* Freezer is not level. It rocks on the
fl oor when it is moved slightly.
* Floor is uneven or weak.
* The LED or light bulb is
burned out.
* No electric current is reaching the
Freezer.
* Control is in Sabbath mode (Sb is
displayed on control)

Installation Checklist

Correction
* This is normal. Sound will level off or disappear as
Freezer continues to run.
* This is normal.
* Level the Freezer. Refer to "LEVELING" section.
* Ensure fl oor can adequately support Freezer. Level Freezer
by putting wood or metal shims under part of the Freezer.
* Re-level Freezer or move Freezer slightly. Refer to
"LEVELING" section.
* This is normal.
* See "DOOR PROBLEMS".
* Open the door less often.
* Clean interior with sponge, warm water, and baking soda.
Replace air fi lter.
* Cover the food tightly.
* This condition can force the cabinet out of square and
misalign the door. Refer to "LEVELING" section.
* Ensure fl oor can adequately support Freezer. Level the
Freezer by putting wood or metal shims under part of the
Freezer.
* Follow directions under "INTERIOR LIGHTING" in the
"FREEZER FEATURES" section.
* See "FREEZER DOES NOT RUN".
* Depress TEMP MODE key and CONTROL LOCK key for 3
seconds.
Electrical Power
 House power turned on
 Freezer plugged in
Air Filter
 Air Filter is installed
Final Checks
 Shipping material removed
 Freezer temperatures set
 Water turned on
 Registration card sent in