Table of Contents
Advertisement
Operation, Parts
Texture Spray Gun
For water-Based Materials Only.
Model: 24S134, 24S135, 24S155 non-bleeder, use with RTX Texture Sprayers
125 psi (8.6 bar, 0.86 MPa) Maximum Air/Fluid Working Pressure
Model: 248093 bleeder, use with GTX Texture Sprayers
125 psi (8.6 bar, 0.86 MPa) Maximum Air/Fluid Working Pressure
Important Safety Instructions
Read all warnings and instructions in this manual and related manuals.
Be familiar with the controls and the proper usage of the equipment.
Save these instructions.
Use only genuine Graco replacement parts.
The use of non-Graco replacement parts may void warranty.
ti28084a
www.graco.com/techsupport
3A3373C
EN
Advertisement
Table of Contents
Related Manuals for Graco 24S155
Summarization of Contents
Texture Spray Gun
Important Safety Instructions
Crucial safety warnings and instructions for operating the spray gun safely and correctly.
Warnings and Hazards
Equipment Misuse Hazard
Risks associated with misuse of equipment, including potential injury or death.
Skin Injection Hazard
Danger of high-pressure fluid piercing skin, requiring immediate medical attention.
Plastic Parts Cleaning Solvent Hazard
Solvent compatibility issues with plastic parts, leading to potential failure.
Personal Protective Equipment
Mandatory protective gear for safe operation, including eye and respiratory protection.
California Proposition 65
Notification regarding chemicals known to cause cancer or reproductive harm.
Component Identification
Spray Gun Components Overview
Visual identification of key parts for specific Graco spray gun models.
Setup and Operation
Pressure Relief Procedure
Essential steps to safely relieve system pressure before maintenance or cleaning.
Spray Disc and Nozzle Selection
Guidance on choosing the right nozzle and disc for desired spray patterns.
Gun Adjustments
Techniques for adjusting material flow, preventing surge, and checking consistency.
Shutdown and Cleanup
Spray Gun Cleaning Procedure
Step-by-step instructions for draining, flushing, and cleaning the spray gun.
Repair Procedures
Fluid Seal Replacement
Detailed guide for replacing the fluid seal on non-bleeder and bleeder guns.
Air Seal Replacement
Procedure for replacing the air seal and associated components.
Troubleshooting
Common Spray Gun Problems and Solutions
Diagnosing and resolving common spray gun issues like material flow and pattern quality.
Parts Information
Component Identification and Parts List
Detailed breakdown of all parts for 24S134, 24S135, 24S155, 248093 models.
Replacement WideTex Discs
Listing of WideTex discs for various applications and finishes.
Technical Specifications
Spray Gun Specifications
Detailed specifications including pressure, dimensions, air requirements, and materials.
Warranty and Information
Graco Standard Warranty Terms
Details of the warranty coverage, limitations, and claim procedures.
Company Information and Contact
Information on how to get the latest product updates and contact Graco.
Need help?
Do you have a question about the 24S155 and is the answer not in the manual?
Questions and answers