Download Print this page

Temperature Controls - Frigidaire FFBC46F5LS Use & Care Manual

Beverage cooler
Hide thumbs

Advertisement

Cool Down Period
For best performance, allow 4 hours for the wine/beverage cooler to cool down completely. The wine/beverage cooler
will run continuously for the first several hours.
Temperature Control
Indication of Temperature in Lower Chamber
: Press this button once and the temperature increase 1°C.
: Press this button once and the temperature decrease 1°C.
Indication of Temperature in Upper Chamber
Indication of Temperature in Lower Chamber
Press this button once to increase temperature 1° F/C.
: Press this button once and the temperature increase 1°C.
: Press this button once and the temperature increase 1°C.
Press this button once to decrease temperature 1° F/C.
: Press this button once and the temperature decrease 1°C.
: Press this button once and the temperature decrease 1°C.
1. The beverage cooler can be operated by adjusting the temperature control buttons (up arrow and down arrow)
Indication of Temperature in Upper Chamber
to the various settings.
: Temperature display.
2. The new desired temperature will flash on the display for a few seconds and then switch back to the actual
: Press this button once and the temperature increase 1°C.
Light: Lighting button for LED lamp; it controls the on/off of lamp.
temperature which will gradually change until setpoint is reached.
: Press this button once and the temperature decrease 1°C.
Power: On/off button used to turn on/off all load.
The temperature range MIN and MAX is 33° - 50°F (1° - 10°C).
Press Light and Power together for 2 seconds and you can convert between
Temperature display
fahrenheit temperature and Celsius temperature.
: Temperature display.
Temperature display
Light: Lighting button for LED lamp; it controls the on/off of lamp.
Light: This button turns the light ON and OFF.
Notice!
Power: On/off button used to turn on/off all load.
Power: This buttons turns the power ON and OFF.
The default temperature is 10/10°C, and the temperature after power
Press Light and Power together for 2 seconds and you can convert between
Press both Light and Power button's at the same time to change between Fahrenheit and Celsius temperatures.
failure will be the temperature set before the power failure.
fahrenheit temperature and Celsius temperature.
The default temperature for the beverage cooler is 41°F (5°C). The temperature after power failure will be the
To elongate the service life of compressor, please wait for at least 5
temperature set before the power failure.
minutes before the wine cooler is restarted after power failure.
To prolong the life of compressor, please wait for at least 5 minutes before the unit is restarted after power failure.
Notice!
Failure display
Failure display
The default temperature is 10/10°C, and the temperature after power
If "E" and "F" are displayed, please contact local service personnel for repair.
failure will be the temperature set before the power failure.
If there is failure on the sensor, the screen may display failure code, such
If the temperature in the cooler is too low, it will display "L".
To elongate the service life of compressor, please wait for at least 5
If the temperature in the cooler is too high, the screen will display "H" and will flash. Under this state, the buzzer
as: E and F. When the screen displays the above-mentioned errors, please
will buzz for 30 seconds. One minute later, the buzzer will continue to buzz for the next 30 seconds. After three
minutes before the wine cooler is restarted after power failure.
do not disassemble it for check by yourself. You should contact local
times, the alarm will not buzz any more. You can press any key to cancel sound alarm.
Storing too many cans or bottles in the cooler may cause the temperature in the cooler to rise temporarily.
Failure display
after-sales service personnel for repair.
fEAtuRES
If the temperature in the cooler is too low, it will display "L".
If there is failure on the sensor, the screen may display failure code, such
When the temperature in the cooler is too high, the screen will display "H"
as: E and F. When the screen displays the above-mentioned errors, please
Adjustable Interior Shelves
and will flash; under this state, the buzzer will buzz until 30 seconds; one
do not disassemble it for check by yourself. You should contact local
Multi-position adjustable interior shelves can be moved to
any position for larger or smaller packages. The shipping
minute later, the buzzer will continue to give alarm in the next 30 seconds; after
after-sales service personnel for repair.
spacers that stabilize the shelves for shipping should be
the alarm is given for three times, it will not give alarm any more. You can
removed and discarded. The Beverage Cooler comes
If the temperature in the cooler is too low, it will display "L".
equipped with three glass shelves.
press any key to cancel sound alarm.
When the temperature in the cooler is too high, the screen will display "H"
Interior Light (Some models)
When you put a lot of wines together in the cooler, the temperature in the
The light comes on automatically when the door is
and will flash; under this state, the buzzer will buzz until 30 seconds; one
opened. The light can also be turned on and off by
cooler may rise temporarily.
minute later, the buzzer will continue to give alarm in the next 30 seconds; after
the alarm is given for three times, it will not give alarm any more. You can
- 10 -

tEMpERAtuRE cOntROLS

pressing the "Light" button on the control panel. Press
the button twice to keep the light on when the door is
closed.
Door Lock
This unit is equipped with a lock near the bottom of the
door. Two keys are provided. Keep the keys out of reach
of children.
7

Advertisement

loading

  Related Manuals for Frigidaire FFBC46F5LS