Download Print this page
Ublox ZOE-M8G Hardware Integration Manual

Ublox ZOE-M8G Hardware Integration Manual

Ultra-small u-blox m8 sip modules

Advertisement

Quick Links

ZOE-M8 series
Ultra-small u-blox M8 SiP modules
Hardware integration manual
Abstract
This document describes the hardware features and specifications of the u-blox ZOE-M8G and
ZOE-M8Q GNSS SiP (system in package) modules.
www.u-blox.com
UBX-16030136 - R09

Advertisement

loading
Need help?

Need help?

Do you have a question about the ZOE-M8G and is the answer not in the manual?

Questions and answers

Summarization of Contents

Hardware Description
Overview
Introduces the ZOE-M8 GNSS SiPs, highlighting their form factor and integrated features.
Design-in
Power Management
Covers supply voltages (VCC, V_CORE, V_BCKP) and the DC/DC converter for power optimization.
Interfaces
Details communication interfaces like UART, SPI, DDC, and SQI for host connectivity.
I/O Pins and Functions
Explains I/O pins, including Time pulse, External interrupt, LNA enable, and EMI impact.
Real-time Clock (RTC) and Time Aiding
Discusses RTC options (crystal, external clock) and time aiding for warm/hot starts.
RF Input and Antenna Configuration
Covers RF input matching, passive/active antennas, and jamming immunity.
System Control and Pin Description
Explains Safe boot mode, System reset, and provides a detailed pinout description.
Typical Schematics and Design-in Checklist
Presents example schematics and a checklist for efficient design implementation.
PCB Layout and Thermal Management
Provides guidelines for PCB layout, footprint, placement, and thermal considerations for optimal performance.
EOS, ESD, and EMI Precautions
Essential precautions against electrical overstress, electrostatic discharge, and electromagnetic interference.
Product Handling and Soldering
Handling, Storage, and ESD Precautions
Best practices for packaging, shipping, storage, and electrostatic discharge prevention.
Soldering Procedures and Recommendations
Guidance on soldering techniques, paste selection, reflow, and inspection.
Product Testing
OEM Manufacturer Test Parameters
Focuses on OEM production tests like sensitivity and host communication.
System Sensitivity Testing
Methods and guidelines for testing GNSS receiver sensitivity using signal generators.
Appendix
Component Selection
Recommends critical components like RTC crystals, RF filters, SQI flash, inductors, and LNAs.
Glossary
Definitions of abbreviations and technical terms used throughout the document.
Related Documents
Lists other relevant u-blox technical documentation and resources.
Revision History
Tracks the changes and updates made to this document over different revisions.
Contact Information
Provides contact details for u-blox offices across different regions.