Starting And Stopping The Engine - GAS GAS FSE 450 - 2006 User Manual

STARTING THE ENGINE
- Ensure that the motorcycle is in neutral.
- Rotate the starter key clockwise (ON (A) position), in this way the
electric circuits are active and the engine can start.
- Without using the throttle, press the electric start button (B).
(A)
(B)
12
-
Stopping the engine
- Change gear to neutral.
- After a slight acceleration, release the throttle completely and rotate
the ignition key anti-clockwise.
- The key should point left (D), this means that all of the electric
circuits are inactive. The engine cannot start.
- The key may be extracted from the ignition.
Starting the engine while the key is being turned to the ON
position may cause a loss in battery power.
-
(D)
NOTE