FRONT PANEL CONTROL
• Power Button:
Press this button to switch ON/OFF of monitor's power.
• MENU / ENTER :
Active OSD menu or function adjust confirm or Exit OSD menu when in
Brightness/Contrast OSD status.
• Contrast
/ ▼ :
Adjust contrast or function adjust.
• Brightness
▲
/
Adjust brightness or function adjust.
• Auto Adjust button / Exit:
1.
When OSD menu is in active status, this button will act as EXIT-KEY
(EXIT OSD menu).
2.
When OSD menu is in off status, press this button over 2 seconds to
activate the Auto Adjustment function.
The Auto Adjustment function is used to set the HPos, VPos, Clock and
Focus.
• Power Indicator:
Green
—
Power On mode.
Red
—
Off mode.
OSD Lock Function: To lock the OSD, press and hold the MENU button while
the monitor is off and then press power button to turn the monitor on.
lock the OSD - press and hold the MENU button while the monitor is off and
then press power button to turn the monitor on.
NOTES
•
Do not install the monitor in a location near heat sources such as radiators or
air ducts, or in a place subject to direct sunlight, or excessive dust or
mechanical vibration or shock.
•
Save the original shipping carton and packing materials, as they will come in
handy if you ever have to ship your monitor.
•
For maximum protection, repackage your monitor as it was originally packed
at the factory.
•
To keep the monitor looking new, periodically clean it with a soft cloth.
Stubborn stains may be removed with a cloth lightly dampened with a mild
detergent solution. Never use strong solvents such as thinner, benzene, or
abrasive cleaners, since these will damage the cabinet. As a safety
precaution, always unplug the monitor before cleaning it.
:
8
To un-