How To Install Inf & Icm File - AOC LM727 Manual

HOW TO INSTALL THE DRIVER-DISK (INF & ICM FILE)
FOR FIRST TIME INSTALL :
Your system may not recognize your flat-panel monitor,and as a result, you may
need to complete the following steps for optimum performance of your monitor.
1. Check this LCD MONITOR is properly connected to your computer.
2. Restart the computer , when win95/98 detects the presence of a Plug and
Play Monitor ,its device driver can be loaded and configured dynamically,
insert LCD Monitor install disk to DISK A after the Win95/98 setup wizard is
appeared. This setup wizard will lead you through the steps for configuring
the system.
(Select " NEXT " for next steps and select driver A for LCD Monitor install file,
if not select driver A ,the configuration system will automatically select the
standard Plug and Play driver)
3. After the installation complete you can find the monitor complete name by
following steps :
Click "START" , select "SETTINGS", select "CONTROL PANEL "Select
"SYSTEM", select " DEVICE MANAGEMENT ", select "MONITOR" icon and
click twice ,you can see the description as follow : "AOC LM727"
if this description doesn't exist, or the "MONITOR" icon doesn't exist too,that
means your installation is not successful.
Please delete the description with click the right button of mouse, and select
The "remove or erase" to delete the description, if your step is successful,
the "MONITOR " icon will disappear.
Please repeat this 2nd, 3rd steps if not success
4. After you complete above setup, please follow the steps below to operate
your monitor at maximum performance :
A). Double click on the My Computer icon
B). Double click on the Control Panel icon
C). Double click on the Display icon, click on the Settings tab
D). In the Desktop Area drag the slider to resolution 1280x1024, and set
the Color palette for 16-bit color
E). Click on the Advanced Properties
F). Select the add-on card tab , set the refresh rate to 60 Hz, click the
OK button, and click on the CLOSE button
15