Controls & Connections - AOC LE22H138 Manual

Controls & Connections
HDMI
HDMI
Component
Item description
Connects to your headphones. If your headphones do not match the jack, use a suitable plug adapter (not
Headphone Jack
supplied). While headphones are connected, the TV speakers are muted.
Connects to the COMPOSITE VIDEO output jack from your video equipment that has COMPOSITE, and audio
AV IN L-AUDIO-R
(L/R) jacks can connect audio source to your TV.
Connect to the COMPOSITE Video/Audio input jacks from your equipment that has COMPOSITE jack.
AV OUT L-AUDIO-R
TV/AV source can support this function.
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between
this TV and any HDMI-equipped audio/video equipment, such as a set-top box, DVD player, Blu-ray Disc player,
A/V receiver as well as PC. HDMI supports enhanced, or high-definition video, plus digital audio.
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN (with DVI-to-HDMI
cable or adapter) jack, and connect the audio jack to the PC AUDIO IN jacks of HDMI IN.
HDMI IN
HDMI connection is necessary to view 480i, 480p, 720p, 1080i and 1080p formats.
Be sure to use only an HDMI cable that bears the HDMI logo.
Connects to a personal computer's video output connector using HD15-HD15 cable (analog RGB). Can also be
connected to other analog RGB equipment. See "PC Input Signal Reference Chart" on page 15 for the signals that
can be displayed.
PC IN (RGB/AUDIO)
For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If this is the case,
connect the adapter to the computer before connecting the HD15-HD15 cable.
If the picture is noisy, flickering or not clear, adjust Phase and Pitch of Screen settings.
Connects to your TV's component video (YPbPr ) and audio (L/R) jacks. Component video provides better picture
Component IN
quality than the composite video connections. Component video (YPbPr) connection is necessary to view 480i,
L-AUDIO-R
480p, 720p, 1080i and 1080p formats.
RF (Radio Frequency or modulated signal design used as the carrier for television broadcasts.) input that
TV(VHF/UHF/Cable) Input
connects to your Cable or VHF/UHF antenna.
SONY/Philips Digital Interconnect Format. SPDIF is mostly used to transmit compressed multichannel audio from
SPDIF
a media player to an Amplifier/receiver.
Power
Menu
Channel
Channel
VOL
VOL
Input
PC IN SPDIF
PC IN
ANTENNA / CABLE
SPDIF
VIDEO L R
ANTENNA / CABLE
AV OUT
DVI-to-HDMI cable DVI-to-HDMI adapter
10
Power Press to turn on / off (standby) the TV set.
1.
Press to open or exit the OSD (on-screen display)
2. MENU
menu.
3. CH Press to select the next higher program number.
4. CH Press to select the next lower program number.
VOL Press to increase the sound volume level.
5.
VOL Press to decrease the sound volume level.
6.
7. INPUT Press to select the input source.
Headphone Jack
AV IN
VIDEO
AV IIN