Page 1
This manual provides as an operational guide to user. All statements, technical information, and recommendations in this manual and in any guides or related documents are believed reliable, but the accuracy and completeness thereof are not guaranteed or warranted, and they are not intended to be, nor should they be understood to be, representations or warranties concerning the products described.
PC Connection ..............................................14 External sound Connection ...........................................14 pC InpUT SIgnal referenCe CharT ........................15 VIdeo InpUT SIgnal referenCe CharT ....................... 15 USIng aoC TV ................................. 16 Turning the TV On and Off ............................................16 Initial Setting ................................................16 Viewing Mode Selection ............................................21 Switching Input Source ............................................22...
Use the Wall-Mount bracket or TV stand which was recommended by 14 ) Refer all servicing to qualified service personnel. Servicing is AOC, and please consult your dealer for detailed information. required when the apparatus has been damaged in any way,...
If the AC power cord is damaged, it may result in a fire or outdoor Use an electric shock. Stop using it and ask your dealer or AOC service center to exchange it. Do not install this TV outdoors. If the TV is exposed to rain, it may result in a fire or an electric shock.
lCd/led Screen electric Shock Do not touch the AC power cord or the TV with a wet hand. If you Although the LCD/LED screen is made with high-precision plug/unplug the AC power cord from the TV with a wet hand, it may technology and has effective pixels of 99.99% or more, black dots cause electric shock.
optional equipment Batteries Do not install optional equipment too close to the TV set. Keep Do not dispose of batteries in a fire. optional equipment at least 11.875 inches (30 cm) away from the TV Do not short circuit, disassemble or overheat the batteries. set.
Sound Install on the wall 11 7/8 inches If a snapping or popping sound from the TV is continuous or frequent 30 cm while the TV is operating, unplug the TV and consult your dealer or service technician. It is normal for some TV’s to make occasional snapping or popping sounds, particu larly when being turned on or off.
Ask a qualified service technician to dispose of the Thank you for purchasing this AOC high-definition television. The quality of the image you see on your AOC TV is only as good as the quality of the signal it receives. To experience the stunning detail of your new AOC TV, you need access to HD programming.
Controls & Connections Power Press to turn on / off (standby) the TV set. Power Press to open or exit the OSD (on-screen display) MENU menu. Menu Press to select the next higher program number. Channel Press to select the next lower program number. Channel Press to increase the sound volume level.
Page 11
Buttons located at the right side of the TV will operate the same as these buttons on the remote control. Button description POWER Press to turn on/off the TV. Press to choose TV source mode. Press to choose CVBS source mode. COMP Press to choose Component source mode.
TV, especially to determine the strength of the wall for withstanding the TV’s weight. For product protection and safety reasons, AOC strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the Wall-Mounting of your TV should be performed by AOC dealer or licensed contractor.
Connecting TV Cable System or VHF/UHF Antenna System You can enjoy standard-definition and high-definition digital programming (if available in your area), along with standard-definition analog programming. This TV is capable of receiving unscrambled digital programming for both cable and external VHF/UHF antenna. It is strongly recommended that you connect the antenna/cable input using a 75-ohm coaxial cable to receive optimum picture quality.
Composite Signal Connection AV IN CVBS CVBS CVBS PC Connection Use the TV as a monitor for your PC shown below with the HD15 to HD15 connection. This TV can also be connected to a PC with DVI or HDMI output.
pC Input Signal reference Chart After connecting the PC to the TV, set the output signal from the PC according to the chart below for 22” 24” TV. Standard resolution horizontal(kHz) frequency(Hz) VESA 640 x 480 31.469 59.94 VESA 800 x 600 35.156 56.250 VESA...
language Setting Feature Menu language English Menu timeout Sleep timer Super contrast B/L Control Closed caption Analog caption Reset all Move Select Exit Press menU/exIT to call out MENU. / Exit Press ▲/▼ to select “Feature” , and press oK. Press ▲/▼...
Viewing mode Selection 4:3 mode Zoom1 mode Suitable for viewing conventional 4:3 programs in Use these aspect modes to zoom in and to reduce their normal format. the black bars. 16:9 mode Zoom2 mode The original content in this mode has to fill the Use these aspect modes to zoom in and to reduce entire screen of the display.
Switching Input Source On AOC TV, you can choose signal source on the remote control directly, or press Source to choose the signal source on the display menu. When choosing signal source on the remote control directly: Press the following keys to switch input source.
oSd manual Setting Channel Search This setting is only available in TV mode. Channel Program No. Cable Tuning mode NTSC-M System standard Auto search Fine tuning Skip Move Select Exit Press MENU/EXIT to call out MENU. / Exit Press ▲/▼ to select “Channel ” , and press OK.
Page 21
Changing Channel/Flashback On AOC TV, you can change channel on the remote control directly, or press CH ▲/▼ on the side of the TV to choose the channel. CH. 2 FM Mono Press the number keys directly to change the channel.
Changing Volume, Mute and Sound Mode Press VOL to change the volume. Press MUTE to mute the TV. Press Audio to change audio mode. For more details, please refer to “Adjust Audio Setting”.
adjust Video Setting Video Preset Personal Brightness Contrast Color Tint Sharpness Noise reduction Color temp. Cool Size 16:9 Move Select Exit Press MENU/EXIT to call out MENU. / Exit Press ▲/▼ to select “VIDEO” , and press oK. Press ▲/▼ to select Video Settings: Preset, Brightness, Contrast, Color, Tint, Sharpness, Noise reduction, Color temp, Size, and press OK to enter.
adjust audio Setting Audio Preset Personal Bass Treble Balance Sound mode FM Mono Move Select Exit Press menU/exIT to call out MENU. / Exit Press ▲/▼ to select “Audio” , and press oK. Press ▲/▼ to select Audio Settings: Preset, Bass, Treble, Balance, Sound mode, SRS, and AVL and press OK to enter.
adjust pC Setting This setting is only available in pC mode. Auto Adjust H.Position V.Position Clock Phase Move Select Exit Press menU/exIT to call out MENU. / Exit Press ▲/▼ to select “VGA” , and press oK. Press ▲/▼ to select VGA Settings: Auto adjust, H.Position, V.Position. Clock, Phase and press OK to enter. Press ◄/►...
feature Setup Feature Menu language English Menu timeout Sleep timer Super contrast B/L Control Closed caption Analog caption Reset all Move Select Exit Press menU/exIT to call out MENU. / Exit Press ▲/▼ to select “Feature” , and press oK. Press ▲/▼...
parental Control: This setting is only available in TV, CVBS modes. Parental Child lock MPAA rating PG rating Can.English Can.French Channel Lock Source Lock Password setting Move Select Exit Press menU/exIT to call out MENU. / Exit Press ▲/▼ to select “Parental” , and press oK.
Page 28
PG rating: Press ▲/▼ to select PG Rating, and press OK. Press ▲/▼/◄/► to select a rating, then press OK to lock or unlock the rating. The rating you locked and all higher ratings will be locked. Press MENU/EXIT to exit. / Exit Note: If you lock or unlock the A (all) rating, all the ratings (D, L, S, V and FV) are locked or unlocked.
Page 29
Password Setting: Press ▲/▼ to select Password Setting, and press OK. Press Number Key to enter the old password..Enter old password Press Number Key to enter the New password..Enter new password Press Number Key to enter the New password..
Troubleshooting Condition explanation / Solution no picture No picture Check the Power Saving settings. Make sure the power cord is connected securely. Turn on the power of the TV. Cannot receive any channels Check antenna/cable connections. Make sure the Cable setting is correct for your TV signal source. TV is locked to one channel Perform Auto Program to add receivable channels that are not present in the TV’s memory.
& Specifications Model LE22H138 LE24H138 Panel Size 546mm(21.5”) 609.7mm(24.0”) Resolution 1920 x 1080 1920 x 1080 TV System NTSC standard NTSC standard PAL-M & PAL-N PAL-M & PAL-N Channel coverage Air: 2 through 69 Air: 2 through 69 Cable TV: 1 through 125...