Preparation; Attaching The Base; Preparing Your Lcd Hdtv For Wall Mounting - AOC L22W961 User Manual

22" lcd tv envision series

Hide thumbs Also See for L22W961:

Table of Contents

PREPARATION

IMPORTANT: Do not apply pressure to the screen display area which may compromise the

integrity of the display. The manufacturer's warranty does not cover user abuse or improper

installations.

IMPORTANT: The Base of the HDTV must be assembled prior to usage.

1. Place TV unit face down on a soft and flat surface

(blanket, foam, cloth, etc.) to prevent any damage to

the HDTV.

2. Carefully align and insert the Base to the stand.

3. Insert the screws to the bottom of the base and

tighten the base to the stand.

PREPARING YOUR LCD HDTV FOR WALL

MOUNTING

We suggest that you keep your TV at least 2.56 inches (65 mm) from the wall to prevent cable

interference.

Before mounting your TV on the wall, you need to remove the base.

For your safety, please use only with UL listed wall mount bracket with minimum weight of the

TV without stand. (Please see page.24.)

To attach a wall mount bracket to your TV:

1 Remove the screws holding your TV to the stand.

2 Pull up the stand base from the hinge and then slide out the stand base from your TV.

3 Secure the wall mount bracket to the back of your TV using four M4 screws, as indicated

in the illustration.

NOTE

 100mmx100mm wall mount bracket & M4 screws are not included.

100 mm

M4 screws

Table of Contents