AOC 2219S1 Operation Instructions Manual page 10

Short Cuts Function from the button(s)
Auto Image Adjust:
Phase (Fine Tune) and Clock (H. Size) of the screen.
Contrast :
To adjust the foreground white level of screen image.
▲
: increase contrast,
DCR ON/OFF :
Brightness : To adjust the luminance of the video.
▲
: increase brightness,
Color Adjust :
saturation between 9300K, 6500K, 5400K, and User Color.
9300K : Adds blue to screen image for cooler white.
6500K : Adds red to screen image for warmer white and richer red.
5400K : Adds green to screen image for a darker color.
User Color : Individual adjustments for red (R), green (G), blue (B).
1. Press button 2 to select the desired color.
▼
2. Press or
Information :
coming from the graphic card in your computer.
Note: See your graphic card user guide for more information about
changing the resolution and refresh rate.
Horizontal Size :
▼
: decrease the width of screen image,
image.
H./V. Position :
▲
H. Position :
▲
V. Position :
Fine Tune : To adjust the delay time of data and clock.
▼ ▲
Press or
Sharpness : To adjust the clarity of a non-WSXGA (1680 x 1050 @ 60Hz)
▼
signal with
To auto adjust Horizontal Position,Vertical Position,
▼
: decrease contrast.
Contrast ratio will be
▼
: decrease brightness.
To select the color for improving brightness and color
▲
button to adjust selected color.
To display the information, regarding the current input signal
To adjust the width of the screen image.
To adjust the horizontal and vertical position of the video.
: move screen to the right,
▼
: move screen up,
to adjust to your preference.
▲
or button.

3000:1, when DCR turn on.
≧
▲
: increase the width of screen
▼
: move screen to the left.
: move screen down.