AOC 2217V User Manual

AOC 2217V User Manual

22-inch widescreen lcd monitor
Hide thumbs Also See for 2217V:

Advertisement

1. Preface

About This Guide

This guide describes the monitor's features, setup, and operation. lnformation in this document is subject to change without notice.
The sections are as follows:
Safety
Instructions: lists safety information.
Setup: describes the initial setup process.
Using the
Monitor: gives an overview of how to use the monitor.
Drivers: provides driver installation instructions for Windows.
: provides tips and solutions for common problems.
Product
Information: lists the technical specifications of the monitor.

National Conventions

The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes,
cautions, and warnings, and they are used as follows:
NOTE:
A NOTE indicates important information that helps you make better use of your computer system.
CAUTION:
A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
2217V User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2217V and is the answer not in the manual?

Questions and answers

Levii
March 9, 2025

Why does the monitor keep turning off when I connect to my ps5?

1 comments:
Mr. Anderson
March 9, 2025

The AOC 2217V monitor may keep turning off when connected to a PS5 due to compatibility issues. The monitor's recommended resolution is 1680x1050, which is not a standard resolution supported by the PS5. Additionally, the monitor uses an analog and digital interface, which may not be fully compatible with the PS5’s HDMI output. To resolve this, try using an HDMI-to-DVI adapter (if applicable) and ensure the PS5 is set to a resolution that the monitor supports, such as 1080p.

This answer is automatically generated

Summary of Contents for AOC 2217V

  • Page 1 2217V User Manual 1. Preface About This Guide This guide describes the monitor's features, setup, and operation. lnformation in this document is subject to change without notice. The sections are as follows: Safety Instructions: lists safety information. Setup: describes the initial setup process.
  • Page 2: Safety Introduction

    WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the warning is mandated by regulatory authority. Product Registration Please link www.aoc.com, select your country or region, log in Product Registration to register.
  • Page 3 NOTICE : 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. 3.
  • Page 4 Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
  • Page 5 Dont leak liquid into monitor which will result in the damage of chassis or component. Please unplug before cleaning ,and do not scratch the screen with hard things. 3. Setup Setup the stand and base Please setup or remove the base following below steps.
  • Page 6 NOTE: Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. Attaching the Cables Cable Connections On Back of Monitor and Computer...
  • Page 7 2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's D-Sub port. 3. (Optional – Requires a video card with DVI port) - Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s DVI port.
  • Page 8 2. Follow the manufacturer's instructions to assemble the wall mounting arm. 3. Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor. 4. Insert the 4 screws into the holes and tighten.
  • Page 9: Using The Monitor

    External Controls Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure ). By changing these settings, the picture can be adjusted to your personal preferences.
  • Page 10 OSD Lock Function: To lock the OSD, press and hold the Left button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the Left button while the monitor is off and then press power button to turn the monitor on.
  • Page 11 DCB Adjustment What is DCB? Dynamic Color Boost (DCB) is an advanced color adjustment technology. Through analyzing RGB signals, DCB creates more vivid and natural images to suit various color environment needs. DCB has two types of color enhancers: “Color Boost” and “Picture Boost”...
  • Page 12 DCC: Dynamic color control ICM: Intelligent color management 1) How to use Color Boost? Five color-enhancement settings: To accommodate various display needs, Color Boost also offers 5 different color enhancement modes: Full Enhance, Natural Skin, Green Field, Sky Blue, and Auto-Detect. Please go to the fourth icon labeled “Color Boost” in the OSD menu and select one of the five settings you desire to be turned on.
  • Page 13 Full Enhance: When "Full Enhance" is turned on, the color saturation of the entire screen is fully enriched, thus all colors become more vibrant. Nature Skin: When "Natural Skin" is turned on, the red and yellow colors are enriched automatically, thus presents human skin with more natural and truer colors.
  • Page 14 Green Field: When "Green Field" is turned on, the green color is enriched so that football field and mountain landscape would look more natural and fresh. “Green Field” setting is ideal for watching mountain scenery and outdoor sports. Sky Blue: When"Sky Blue" is turned on, the color blue is being fine-tuned so that the sky or ocean landscape will look more vivid and in-depth.
  • Page 15 Auto Detect: When “Auto Detect” is turned on, every pigment will be detected and self-adjusted to render a lively picture. Demo: Screen divided into two for demonstration purposes. 2) How to use Picture Boost? Users can change the color settings of a self-selected zone on the screen. The size and position of the selected zone can also be adjusted.
  • Page 16 Disclaimer: DCB aftereffects are subject to the resolution and quality of the display content, hence may look different than the above illustrations. DCR Adjustment...
  • Page 17 What is DCR? Dynamic Contrast Ratio (DCR) auto adjusts the brightness of the screen so users can see the darker areas of the displayed content in more depths. By increasing the darkness of the dark areas and the brightness of the bright areas, contrast ratio is uplifted to exceed 2000:1.
  • Page 18 DCR Demos: Disclaimer: DCR aftereffects are subject to the resolution and quality of the display content, hence may look different than the above illustrations. Function Control Illustration Luminance Brightness Contrast Eco mode Adjust Range Description 0-100 Backlight Adjustment 0-100 Contrast from Digital-register. Standard Mode Standard Text Mode...
  • Page 19 Sports Gamma Gamma1 Gamma2 Gamma3 Image Setup Clock 0-100 Phase 0-100 H.Position 0-100 V.Position 0-100 Color Temp. Warm 6500K Normal 7300K Cool 9300K sRGB User Green Blue Color Boost Full Enhance on or off Nature Skin on or off Green Field on or off Sports Mode Adjust to Gamma1...
  • Page 20 Sky-blue on or off AutoDetect on or off Demo on or off Picture Boost Frame Size 14-100 Brightness 0-100 Contrast 0-100 0-100 Saturation 0-100 Position H. position V.position Bright Frame on or off OSD Setup H.Position 0-100 V.Position 0-100 Timeout 5-120 Transparence 0-100...
  • Page 21 Active-off Mode How to use i-menu software Installation Welcome to use “i-menu” software by AOC. i-menu makes it easy to adjust your monitor display setting by menus on the screen instead of OSD button on the monitor. Please click guide .
  • Page 22 Luminance Adjust Range Contrast 0-100 Brightness 0-100 Eco mode Standard Text Internet Game Movie Description Contrast from Digital-register. Backlight Adjustment Standard Mode Text Mode Internet Mode Game Mode Movie Mode...
  • Page 23 Sports Gamma Gamma1 Gamma2 Gamma3 Reset Remarks: 1) If DCR is set to “on”, the other 4 items of Luminance cannot be adjusted. 2) If anyone of DCR, Color Boost and Bright Frame of Picture Boost is set to “on”, the others are set to “off” automatically. 3) The Brightness and Contrast can be adjusted only when Eco-mode is on “standard mode”.
  • Page 24 Image Setup Clock Phase H.Position V.Position Reset 3. Color Temperature Adjust Range Description 0-100 Adjust picture Clock to reduce Vertical-Line noise. 0-100 Adjust Picture Phase to reduce Horizontal-Line noise 0-100 Adjust the verticalposition of the picture. 0-100 Adjust the horizontal position of the picture. Reset the current page...
  • Page 25 Reset Remarks: 1) When “User” is chosen, you can change the monitor color to your desired color by setting the value of R-G-B. 2) When “sRGB” is chosen, the Brightness, Contrast and Gamma can not be adjusted. 4. Color Boost...
  • Page 26 Color Boost Full Enhance Nature Skin Green Field Sky-blue AutoDetect Demo Reset Adjust Range Description on or off Disable or Enable Full Enhance Mode on or off Disable or Enable Nature Skin Mode on or off Disable or Enable Green Field Mode on or off Disable or Enable Sky-blue Mode on or off...
  • Page 27 Remarks: 1) There is only one item can be set to “on” except Demo. If you set any item to “on”, the others are changed to “off” automatically. 2) If anyone of DCR, Color Boost and Bright Frame of Picture Boost is set to “on”, the others are set to “off” automatically. 5.
  • Page 28 V.position 0-100 Reset Remarks: 1) Only when Bright Frame is set to “on”, the other 5 items can be adjusted. 2) If anyone of DCR, Color Boost and Bright Frame of Picture Boost is set to “on”, the others are set to “off” automatically. 6.
  • Page 29 7. Extra...
  • Page 30 8. Help On this page, you can find the information of the monitor . Welcome to link our website and send email to us if you have any problem.
  • Page 31 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below.
  • Page 32 5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button.
  • Page 33: Technical Support

    Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor. In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer & video card. Check with your computer manufacturer. Also check the monitor's video cable and make sure none of the pins are bent.
  • Page 34: Product Information

    Make sure the monitor's video cable is properly connected to the computer. Inspect the monitor's video cable and make sure none of the pins are bent. Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED.
  • Page 35 Input Connector Input Video Signal Power Source Power Consumption Physical Connector Type Characteristics Signal Cable Type Dimensions & Weight: Height (with base) Width Depth Weight (monitor only) Weight (with packaging) Environmental Temperature: Operating Non-Operating Humidity: Operating Non-Operating Altitude: Operating Non-Operating 473.76mm...
  • Page 36 EPA ENERGY STAR ® ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, AOC International (Europe) GmbH has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Preset Display Modes STAND RESOLUTION Dos-mode 640×400 @70Hz 640×480 @60Hz Mac-mode 640×480 @67Hz...
  • Page 37 1024×768 @75Hz Mac-mode 1024×768 @75Hz IBM-mode 1152×864 @75Hz 1280×768 @60Hz 1280×768 @60Hz 1280×768 @75Hz VESA-Mode 1280×960 @60Hz SXGA 1280×1024 @75Hz SXGA 1280×1024 @75Hz WXGA 1440×900 @75Hz WXGA 1440×900 @75Hz WSXGA 1680×1050 @60Hz Pin Assignments Pin Number 15-Pin Side of the Signal Cable Video-Red Video-Green Video-Blue...
  • Page 38 Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.

Table of Contents

Save PDF