AOC 2217PWC User Manual page 17

OSD Setup
H.Position
V.Position
Timeout
Language
Extra
Input Select
Auto Config
Reset
DDC-CI
Information
LED Indicators
Status
Full Power Mode
Active-off Mode
Camera Software
. There is webcam application software in attached CD, please click " here" and download to your computer for customization.
5. Drivers
Windows 2000
1. Start Windows® 2000
2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3. Double click on the 'Display' Icon.
4. Select the 'Settings' tab then click on 'Advanced...'.
5. Select 'Monitor'
- If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.
- If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below.
6. Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button.
7. Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on 'Next' and then click on 'Have disk...'.
8. Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive).
0-100
0-100
0-100
Digital
Analog
yes or no
yes or no
LED Color
Green or Blue
Orange or red
Adjust the verticalposition of OSD
Adjust the horizontal position of OSD
Adjust the OSD Timeout
Select the OSD language
Select Digital Sigal Source as Input
Select Analog Sigal Source as Input
Auto adjust the picture to default
Reset the menu to default
Turn ON/OFF DDC-CI Support
Show the information of the main image and sub-image source