Table of Contents
Advertisement
Quick Links
Fisher Engineering
50 Gordon Drive, Rockland, Maine 04841‑2139 • www.fisherplows.com
HS Compact Plow
Blade and Off‑Truck Kit
Installation Instructions
CAUTION
Read this document before installing the
snowplow.
CAUTION
See your FISHER
outlet/website for specific
®
vehicle application recommendations before
installation. The eMatch selection system has
specific vehicle and snowplow requirements.
A DIVISION OF FISHER, LLC
85280, 85285
85240, 85240‑3
July 15, 2020
Lit. No. 85309, Rev. 03
Advertisement
Table of Contents
Related Manuals for Fisher 85285
Summarization of Contents
SAFETY
Safety Definitions
Explains the meaning of WARNING, CAUTION, and NOTE indicators in safety communication.
Product Labels
Details the serial number, warning, caution, and instruction labels found on the snowplow.
Safety Precautions
Lists essential safety measures to prevent injury and equipment damage during installation and operation.
Hydraulic Safety
Provides critical safety guidelines for handling hydraulic systems and fluids.
Fuses
Information on fuse types, replacement, and potential system damage from incorrect fuses.
Personal Safety
Advises on personal protective equipment and safe practices during installation and service.
Fire and Explosion Hazards
Warns about flammable gasoline and explosion risks, emphasizing safe handling practices.
Cell Phone Usage
Advises drivers to avoid distractions and pay attention to the road while operating mobile devices.
Ventilation Requirements
Highlights the danger of vehicle exhaust fumes and the need for proper ventilation.
Noise and Vibration Levels
States the noise emission and vibration levels experienced by the snowplow operator.
Torque Chart
Provides recommended torque values for inch and metric fasteners used in assembly.
INSTALLATION INSTRUCTIONS
Unpacking the Snowplow
Steps for safely removing the snowplow components from the pallet.
A-Frame to Blade Assembly
Guides on connecting the A-frame to the plow blade assembly, including trip springs and bumpers.
Blade and A-Frame Assembly Details
Covers installing bumpers, trip springs, angle rams, blade guides, and securing the cutting edge.
Stand and Receiver Installation
Details how to secure the stand and install the vehicle receivers for the snowplow hitch.
Headlamp Installation
Step-by-step guide for mounting, wiring, and aiming halogen and LED headlamps.
Hydraulic Unit Setup
Instructions for attaching the hydraulic unit, installing the breather, and checking/filling hydraulic fluid.
Blade Drop Speed Adjustment
How to adjust the quill in the valve manifold to control the blade's drop speed.
Final Inspection and Hose Adjustment
Final checks, hose routing, and lubrication of hitch pins after installation.
OPERATIONAL TEST AND FINAL ADJUSTMENTS
Plug Covers Usage
Instructions for using plug covers when the snowplow is disconnected from the vehicle.
Owner's Manual Distribution
Guidance on reviewing and providing the Owner's Manual to the purchaser.
Need help?
Do you have a question about the 85285 and is the answer not in the manual?
Questions and answers