Related Manuals for Samsung AR24RXFP Series
Summarization of Contents
Safety and General Information
General Installation Information
Read manual carefully before installation and keep for future reference. Handle with care.
Product Installation Safety Guidelines
Crucial safety guidelines for installation, handling damaged products, and performing functional tests.
Installation Guides and Preparation
Seaside Installation Guide
Specific instructions for installing air conditioners near the sea to prevent corrosion and ensure proper function.
Outdoor Unit Installation Requirements
Guidelines and restrictions for installing the outdoor unit, including environmental and safety considerations.
Choosing the Indoor Unit Installation Location
Guidance on selecting an appropriate installation location for the indoor unit, considering clearances and pipe routing.
Unpacking the Indoor Unit
Procedure for safely unpacking the indoor unit from its packaging.
Indoor Unit Installation Steps
Drilling Wall Holes for Piping
Instructions on drilling the correct size hole in the wall for pipe bundle passage, ensuring proper slant.
Bundling Pipes, Cables, and Drain Hose
Steps for insulating and taping refrigerant pipes, power cables, and drain hose for protection and condensation prevention.
Connecting Power and Communication Cables
Detailed steps for connecting power and communication cables to the indoor unit, including wire specifications.
Extending the Power Cable
Procedure for safely extending the power cable using connection sleeves and contraction tubes.
Installing and Connecting the Drain Hose
Instructions for installing the drain hose and testing its drainage functionality.
Extending the Drain Hose
Guide on how to extend the drain hose using an extension hose and appropriate insulation.
Changing Drain Hose Direction
Steps to change the direction of the drain hose for proper water flow and drainage.
Connecting Refrigerant Pipes
Procedure for connecting indoor and outdoor unit refrigerant pipes using flare connections, specifying pipe types.
Modifying Refrigerant Pipe Length
Instructions for shortening or extending refrigerant pipes, including torque specifications and bending radius.
Fixing the Installation Plate
Guidelines for securely fixing the indoor unit's installation plate to walls, window frames, or gypsum boards.
Outdoor Unit Installation Steps
Fixing the Outdoor Unit in Place
Instructions for placing and securing the outdoor unit on its support, ensuring stability and proper air flow.
Connecting Outdoor Unit Cables and Pipes
Steps for connecting power, communication cables, and refrigerant pipes to the outdoor unit.
Evacuating Air from the System
Procedure for removing air and moisture from the refrigerant circuit using a vacuum pump to ensure system integrity.
Adding Refrigerant (R-32)
Guidelines for safely adding R-32 refrigerant, including precautions and pipe length considerations.
Refrigerant Regulations and Safety
Information on fluorinated greenhouse gases (R-32) and relevant regulations for handling and venting.
Installation Inspection and Maintenance
Performing Gas Leak Tests
Detailed steps for testing refrigerant pipe connections for leaks using soap lather or liquid.
Running Smart Install Mode
Instructions on how to initiate and use the Smart Install mode for automated system setup and checks.
Final Checks and Trial Operation
Steps to perform final checks and conduct a trial operation to ensure the air conditioner functions correctly.
Gas Leak Tests for Repair
Procedure for performing gas leak tests during repair of the refrigerant circuit, emphasizing safety and proper flushing.
Decommissioning Procedures
Requirements for safely decommissioning the unit, including refrigerant recovery and electrical isolation.
Optional Sub PCB Installation
Sub PCB Installation Steps
Instructions for installing the optional Sub PCB, typically for multi-system control.
Need help?
Do you have a question about the AR24RXFP Series and is the answer not in the manual?
Questions and answers