Changing The Camera Angle; Zooming In/Out A Scene - Sherwood SD-860 Operating Instructions Manual

CHANGING THE CAMERA ANGLE

• Some DVDs contain scenes which have been shot simultaneously from multiple camera angles.
For these discs, the same scene can be viewed from each of these different angles.
• The recorded angles differ depending on the disc used.
• During playback at the scene recorded from multiple camera angles, press the ANGLE button.
RC
• Each time this button is pressed, the angle changes as follows:
Example)
Selected angle number
Note : This function works only at scenes recorded from multiple angles.

ZOOMING IN/OUT A SCENE

• In the zoom-in mode only, you can select and view any part of the scene close-up.
During playback or in the still
1
picture or the pause mode,
press the ZOOM button.
To select a zoom scale
• In the zoom on mode,
• Each time the button is pressed,
zoom scale changes as follows
025 PCT 050 PCT 100 PCT
zoom-out mode
Only while zooming in a scene,
2
press the CURSOR
buttons to select the desired
part of the scene.
Total number
RC
RC
150 PCT 200 PCT
zoom-in mode
/ / /
RC
• During playback at the scene recorded from multiple camera
angles, the angle symbol(
screen only when the ANGLE MARK is set to ON.(Refer to
"When selecting the ANGLE MARK" on page 43.)
• Each time this button is pressed, zoom scale or zoom
mode changes as follows:
• The unit zooms in to the center part of the scene.
ZOOM X1.5 ZOOM X2
Zoom-in mode
ZOOM X2 ZOOM OFF
Zoom-in mode Zoom playback off mode
ZOOM ON ZOOM OFF
• To return to the previous operation status, press the
ZOOM button repeatedly until the zoom playback is
canceled.
Notes:
• The zoom function may not work with some discs or files.
• The zoom function may not work properly at some
scenes.
• Zooming is not possible at a title or DVD menu, etc.
28
) is displayed on the TV
ZOOM X3 ZOOM OFF
Zoom playback off mode