Sherwood SD-860 Operating Instructions Manual page 40

Continued
When selecting the SPEAKER DISTANCE
Press the CURSOR
1
RC
Press the CURSOR
2
Press the CURSOR
3
Press the CURSOR
4
preferred setting, then press the ENTER button.
RC
Press the CURSOR
5
Set other speakers to preferred distances.
6
To return to the speaker setup menu screen
• Press the CURSOR
SETUP" and press the ENTER button.
Then the speaker setup menu screen will be displayed.
• When the RETURN button is pressed, the speaker setup menu screen will be displayed, too.
Set other setups to your preference.
7
/ buttons to select the SPEAKER DISTANCE, then press the ENTER button.
RC
Item
menu
/ buttons to select the preferred item.
RC
button to select the setting menu.
RC
/ buttons to select the
RC
button to select the item menu.
RC
button to select the item menu, press the CURSOR
SPEAKER DISTANCE
UNIT METERS
FRONT L FEET
CENTER
FRONT R
SURROUND R
SURROUND L
SPEAKER SETUP
• Then the setting menu of the selected item is displayed.
• Each time the CURSOR
setting menu or the item menu is selected.
When selecting the preferred unit,
• You can select either METERS or FEET.
• Once a unit is selected, the distances are automatically
changed in the selected unit.
When setting the distance
• You can set the distance within the range of 1.5~9.0 meters
in 0.3 meter intervals(or 5~30 feet in 1 feet intervals)
Note : You cannot select the subwoofer and speakers set
to NONE.
• Each time the CURSOR
item menu or the setting menu is selected.
40
Setting menu
or button is pressed, the
or button is pressed, the
/ buttons to select "SPEAKER