Sherwood SD-860 Operating Instructions Manual page 17

To stop playback
Main unit
or
To pause playback
Main unit
Frame advance playback
• In the still picture mode,
Main unit
To select a title/group during playback
• When some DVDs contain more than one title/group, you
can select the desired one.
To skip
back
RC
RC
or
RC
or
RC
To skip
ahead
• When playback of a DVD is stopped, the unit memorizes
the point where the STOP( ) button was
pressed(RESUME function: DVD only).
("RESUME" is displayed on the unit's display when this
function is activated.)
• Press the PLAY( ) button again, and playback will resume
from this point. When the STOP( ) button is pressed
again, the RESUME function will be canceled and it enters
stop mode.("STOP" is displayed.)
• During playback of a DVD, when the unit is turned off and
on with pressing the STANDBY button and the POWER ON
button, the resume function is activated, too.
• DVD Video :
The unit will be in the still picture mode.
In case of DVD Audio, it can be in the still picture mode only
for the video part.
• DVD Audio/SACD/CD/MP3/WMA/JPEG/DivX disc :
The unit will be in the pause mode.
• To return to normal playback, press the PLAY( ) button.
• Each time the PAUSE/STEP( ) button is pressed, the disc
is advanced by one frame.
• In case of DVD Audio, the frame advance playback is
possible only for the video part.
• To return to normal playback, press the PLAY( ) button.
• Each time the button is pressed, a title/ group is skipped.
17