Changing The Camera Angle [Dvd Video Only]; Playing A Scene Close-Up [Dvd Video Only] - Sherwood Newcastle V-768 Manual

CHANGING THE CAMERA ANGLE [DVD
• Some DVD Videos contain scenes which have been shot simultaneously from multiple camera angles.
For these discs, the same scene can be viewed from each of these different angles.
• The recorded angles differ depending on the disc used.
• During playback at the scene recorded from multiple camera angles, press the ANGLE button.
RC
• Each time this button is pressed, the angle changes as follows:
Example)
Selected angle number
Note :
• This function works only at scenes recorded from multiple angles.
PLAYING A SCENE CLOSE-UP [DVD
• It is possible to zoom in a part of the scene. You can select and view any part of the scene close-up.
During playback or in the still pause mode, press the ZOOM button.
1
RC
Tilt the CURSOR/ENTER button in the desired direction to select the desired part of the scene.
2
RC
• To return to the previous operation status, press the ZOOM button repeatedly until the zoom playback is
canceled.
• During playback at the scene recorded from multiple
camera angles, the "ANGLE" is displayed on the
unit's display.
• Then the angle symbol is displayed on the TV
screen for several seconds.
Total number
1/3
• The unit zooms in to the center part of the scene.
• Each time this button is pressed, zoom scale
changes as follows:
ZOOM X1.5
Note:
• Depending on some operation status such as
playback of DVD Video by using a title or DVD
menu, etc., the zoom playback does not work.
25
2/3
ZOOM X2 ZOOM X3
3/3
ZOOM OFF
(Zoom playback off mode)