Sherwood RD-6502 Operating Instructions Manual page 28

Dubbing the audio and video signals separately onto VIDEO 1
Example) When dubbing the VIDEO 2 video signal and the CD audio signal separately onto VIDEO 1.
.
1
Select VIDEO 2 as a video recording source.
or
.
2
Select CD as an audio recording source.
or
.
3
Start recording on the VIDEO 1.
.
4
Start play on the VIDEO 2 and the CD respectively.
• The audio signal from the CD and the video signal from the VIDEO 2 will be dubbed and you can enjoy them
on the TV set and from the speakers.
Be sure to observe the order of the above steps 1 and 2.
�Note :
27