Standard Horizon SSM-72H Owner's Manual

Wireless Remote Access Microphone
To connect the SSM-72H (RAM4X), the SCU-30 Wireless Access Point
firmware must be Ver. 2.00.00 or later.
The RAM4X (SSM-72H) allows remote control for all functions (Except "SPEAKER
SELECT" in the CONFIGURATION SETUP MENU), of the enabled Standard
Horizon fixed mount VHF radio. The full dot matrix display and programmable keys
make operations quick and easy. Additional features include a Water activated
Emergency Strobe Light, a MOB (Man Over-Board) function, and all DSC functions
including Distress Signaling. Utilizing the optional SCU-30 Wireless Access Point,
up to four RAM4X (SSM-72H) Wireless Remote Access Microphones may be
connected to a fixed mount VHF radio.
RAM4X ( SSM-72H )
NOTE