Related Manuals for Toro 22218G
Summarization of Contents
Introduction
Overview and Purpose
Overview of the machine and manual's purpose.
Safety
General Safety Practices
Crucial safety instructions for operating the machine.
Safety Decals and Instructions
Information on identifying and maintaining safety decals.
Setup
Checking Hydraulic Fluid Level
Procedure to check the hydraulic fluid level.
Charging Batteries
Steps for charging the machine's batteries.
Product Overview
Machine Controls Overview
Explanation of the machine's control panel and levers.
InfoCenter Menus
Menu Navigation and Options
How to navigate menus, access settings, and view information.
Specifications
Attachments and Accessories
Information on compatible attachments and accessories.
Operation
Before Operation Safety
Essential safety precautions before starting operation.
General Operation Safety
Broad safety rules applicable during operation.
Performing Daily Maintenance
Adjusting Operator Support
How to adjust the thigh support for operator comfort.
During Operation
During Operation Safety
Safety precautions to follow while the machine is in use.
Using Attachments
Installing an Attachment
Steps for properly installing an attachment.
InfoCenter Features
Attachment Mode and Protected Menus
Changing attachment modes and accessing protected settings via PIN.
After Operation Procedures
After Operation Safety
Safety precautions to follow after operation.
Battery and Charger Safety
Safety guidelines for batteries and chargers.
Hauling the Machine
Selecting a Trailer
Guidelines for choosing an appropriate trailer.
Maintaining the Batteries
Battery Maintenance Guidelines
Best practices for battery care, storage, and longevity.
Monitoring Charging and Troubleshooting
Completing the Charging Process
Final steps after the battery charging is complete.
Maintenance
Maintenance Safety
Safety precautions to follow during all maintenance tasks.
Maintenance Schedule
A schedule of maintenance tasks based on usage intervals.
Pre-Maintenance Procedures
Using Cylinder Locks
How to install and use cylinder locks for safety.
Accessing Internal Components
Safety precautions when accessing internal parts.
Removing the Hood
Steps to remove the machine's hood for access.
Lubrication
Greasing the Machine
Step-by-step guide for greasing the machine's fittings.
Electrical System Maintenance
Electrical Safety and Power Control
Safety precautions for electrical systems and power disconnection.
Specific Electrical Component Maintenance
Procedures for replacing static strap, servicing batteries, and charger maintenance.
Drive System Maintenance
Tire Tread and Lug Nut Checks
How to inspect tire treads and check wheel-lug nuts.
Brake Maintenance
Testing Parking Brake
Steps to test the functionality of the parking brake.
Hydraulic System Maintenance
Hydraulic System Safety and Pressure Relief
Safety precautions and procedures for relieving hydraulic pressure.
Cleaning
Cleaning Procedures
Steps for removing debris and washing the machine.
Storage
Storage Safety
Safety precautions to follow when storing the machine.
Troubleshooting
Machine Troubleshooting
Troubleshooting steps for common machine issues.
Battery-Charger Error Codes
Explains error codes from the battery charger.
Need help?
Do you have a question about the 22218G and is the answer not in the manual?
Questions and answers