Connecting To Gas Supply - Desa Comfort Glow CGS2718P Owner's Operation And Installation Manual

Yellow flame design unvented (vent-free) propane/lp gas log heater
Table of Contents

Advertisement

INSTALLING
Continued
102989
Figure 12 - Attaching Base Assembly to Fireplace Floor

CONNECTING TO GAS SUPPLY

A qualified service person must connect heater to gas supply.
Follow all local codes.
Never connect heater directly to the propane supply. This heater
requires an external regulator (not supplied). Install the external
regulator between the heater and propane supply.
Installation Items Needed
Before installing heater, make sure you have the items listed below.
• external regulator (supplied by
installer, see page 16)
• piping (check local codes)
• sealant (resistant to propane/LP gas)
• manual shutoff valve *
* An A.G.A. design-certified manual shutoff valve with 1/8" NPT tap is an acceptable
alternative to test gauge connection. Purchase the optional A.G.A. design-certified
manual shutoff valve from your dealer. See Accessories, page 29.
Masonry Screw
NOTICE
CAUTION
WARNING ICON
G 001
• test gauge connection *
• sediment trap
• tee joint
• pipe wrench
Mounting
Bracket
Continued
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Comfort glow cgs3124p

Table of Contents

Save Article as PDF